Page 1 of 1

Calls are going blank

PostPosted: Thu May 17, 2018 6:43 am
by vijo
Dear Team,

I have installed vicidial 2.14 in centos 6.9 Server.After installing everything was fine.

I have created campaign and in groups with ring agent with mobile numbers.


But now iam facing some issue

1.) -: When ever the incoming call comes the calls are forwarding to agent but once the agent answered the call the call is going blank its disconcerting and the customer call is still not disconnected and the customer call gone blank.

2.)-:for some calls when the calls are are forwarding to agent but getting disconnected after 5 to 10 seconds and in the vicidial still shows that the agent in call and customer call still not disconnected.

3)-: For some calls is waiting in queue and agents are free but still the calls are not dialing out to agents.


Attached the log for Issue 1:



[May 17 14:21:14] VERBOSE[27809] pbx.c: -- Goto (default,78600054,1)
[May 17 14:21:14] VERBOSE[27809] pbx.c: -- Executing [78600054@default:1] MeetMe("Local/192*168*001*040*78600054@default-00000001;2", "8600054,Fq") in new stack
[May 17 14:21:14] VERBOSE[27810] pbx.c: -- Executing [83047777777777@vicidial-auto:1] Answer("Local/192*168*001*040*78600054@default-00000001;1", "") in new stack
[May 17 14:21:14] VERBOSE[27810] pbx.c: -- Executing [83047777777777@vicidial-auto:2] Playback("Local/192*168*001*040*78600054@default-00000001;1", "ding") in new stack
[May 17 14:21:14] VERBOSE[27810] file.c: -- <Local/192*168*001*040*78600054@default-00000001;1> Playing 'ding.gsm' (language 'en')
[May 17 14:21:14] VERBOSE[27810] pbx.c: -- Executing [83047777777777@vicidial-auto:3] Hangup("Local/192*168*001*040*78600054@default-00000001;1", "") in new stack
[May 17 14:21:14] VERBOSE[27810] pbx.c: == Spawn extension (vicidial-auto, 83047777777777, 3) exited non-zero on 'Local/192*168*001*040*78600054@default-00000001;1'
[May 17 14:21:14] VERBOSE[27810] pbx.c: -- Executing [h@vicidial-auto:1] AGI("Local/192*168*001*040*78600054@default-00000001;1", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16---------------") in new stack
[May 17 14:21:14] VERBOSE[27810] res_agi.c: -- <Local/192*168*001*040*78600054@default-00000001;1>AGI Script agi://127.0.0.1:4577/call_log--HVcauses ... ---------- completed, returning 0
[May 17 14:21:14] VERBOSE[27809] pbx.c: == Spawn extension (default, 78600054, 1) exited non-zero on 'Local/192*168*001*040*78600054@default-00000001;2'
[May 17 14:21:14] VERBOSE[27809] pbx.c: -- Executing [h@default:1] AGI("Local/192*168*001*040*78600054@default-00000001;2", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0---------------") in new stack
[May 17 14:21:14] VERBOSE[27809] res_agi.c: -- <Local/192*168*001*040*78600054@default-00000001;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses ... ---------- completed, returning 0
[May 17 14:21:15] VERBOSE[27842] manager.c: == Manager 'sendcron' logged on from 127.0.0.1
[May 17 14:21:15] VERBOSE[27843] pbx.c: -- Executing [58600054@default:1] MeetMe("Local/58600054@default-00000002;2", "8600054,Fmq") in new stack
[May 17 14:21:15] VERBOSE[27844] pbx.c: -- Executing [8309@default:1] Answer("Local/58600054@default-00000002;1", "") in new stack
[May 17 14:21:15] VERBOSE[27844] pbx.c: -- Executing [8309@default:2] Monitor("Local/58600054@default-00000002;1", "wav,20180517-142114_919739962916_ManinderSingh_CLUBFTRY") in new stack
[May 17 14:21:15] VERBOSE[27844] pbx.c: -- Executing [8309@default:3] Wait("Local/58600054@default-00000002;1", "3600") in new stack
[May 17 14:21:15] VERBOSE[27808] manager.c: == Manager 'sendcron' logged off from 127.0.0.1
[May 17 14:21:16] VERBOSE[27842] manager.c: == Manager 'sendcron' logged off from 127.0.0.1
[May 17 14:21:20] VERBOSE[27962] manager.c: == Manager 'sendcron' logged on from 127.0.0.1
[May 17 14:21:21] VERBOSE[27962] manager.c: == Manager 'sendcron' logged off from 127.0.0.1











Can any one help on this?

Re: Calls are going blank

PostPosted: Wed Jul 24, 2019 2:25 pm
by manoj.9494
check agent phone
also check your carrier setting that you allowed codec that is available in your server

also it due to incomplete or error installation, reinstall server with fresh cd with fresh ISO download