Page 1 of 1

Cannot transfer to TOLLFREE number

PostPosted: Fri Nov 27, 2015 9:12 am
by john3
Hi

Is anyone help me ..

I have a problem I cannot connect to TOLLFREE number when i try to manualy dial on vicidial is automatically hung up dead air.
But when I try to dial a normal number like # 2068011811 its successfully connected no issues problem.

I tried also to transfer a live call to any U.S TOLLFREE number . Cannot connect but If i tried to transfer a live call to a normal U.S number is successffully connected

What is the problem on this can anyone please help me.

heres my config

[DASHTELCO]
disallow=all
allow=gsm
allow=ulaw
type=friend
secret=@c3sM3nXXXXX
username=DashInXXXXX
host=173.248.XX.XX
dtmfmode=rfc2833
context=trunkinbound
qualify=yes
insecure=very
nat=yes


exten => _1XXXXXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _1XXXXXXXXXX,3,Dial(${DASHTELCO}/${EXTEN},,tTor)
exten => _1XXXXXXXXXX,4,Hangup


CLI>

[Nov 27 09:11:10] == Using SIP RTP CoS mark 5
[Nov 27 09:11:10] -- Called SIP/DASHTELCO/18884014678
[Nov 27 09:11:10] == Everyone is busy/congested at this time (1:0/0/1)
[Nov 27 09:11:10] -- Executing [18884014678@default:4] Hangup("Local/8600051@default-00003614;1", "") in new stack
[Nov 27 09:11:10] == Spawn extension (default, 18884014678, 4) exited non-zero on 'Local/8600051@default-00003614;1'
[Nov 27 09:11:10] -- Executing [h@default:1] AGI("Local/8600051@default-00003614;1", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----1-----CHANUNAVAIL----------") in new stack
[Nov 27 09:11:10] -- <Local/8600051@default-00003614;1>AGI Script agi://127.0.0.1:4577/call_log--HVcauses ... ---------- completed, returning 0
[Nov 27 09:11:10] == Spawn extension (default, 8600051, 1) exited non-zero on 'Local/8600051@default-00003614;2'
[Nov 27 09:11:10] -- Executing [h@default:1] AGI("Local/8600051@default-00003614;2", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0---------------") in new stack
[Nov 27 09:11:10] -- <Local/8600051@default-00003614;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses ... ---------- completed, returning 0


Please help me anyone can help this..

Thank you,