Goautodial 2.1 - Sorry, there are no available sessions

General and Support topics relating to ViciDialNow and GoAutoDial ISO installers

Moderators: enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, s0lid

Goautodial 2.1 - Sorry, there are no available sessions

Postby root2 » Fri Aug 19, 2011 7:39 am

Hi All!

I have just installed goautodial ver 2.1 (from scratch). I already did the following and also followed the steps in the "Getting Started Guide" and was able to manually dial out from another computer (soft phone connected to the server). But when I tried logging to the agent interface it's saying "Sorry, there are no available sessions".

I have already done the following:

1.Changed IP
2.Configured voip carrier
3.Created the Campaign and softphone extensions.
4.Created the a list and uploaded leads.

Seats: 5

Voip: Novatel

Hardware:
Intel Dual Core
2gig memory
500gig HD
Single lan



I hope this helps!
root2
 
Posts: 20
Joined: Fri Aug 19, 2011 6:46 am

Addt'l infos

Postby root2 » Fri Aug 19, 2011 7:53 am

agent001 - agent001 GROUP: AGENTS
Agent Logged in at server: 192.168.1.105
in session:
from phone: SIP/8001
Agent is in campaign: 115
status: PAUSED
hungup last call at: 2011-08-19 08:01:27
Closer groups:
root2
 
Posts: 20
Joined: Fri Aug 19, 2011 6:46 am

Postby root2 » Fri Aug 19, 2011 8:12 am

VICIDIAL VERSION: 2.4-325c BUILD: 110430-1924
Canonical Hostname
192.168.1.105
Listening IP
192.168.1.105
Kernel Version
2.6.18-238.9.1.el5.goPAE (SMP)
Distro Name
GoAutoDial CE 2.1
root2
 
Posts: 20
Joined: Fri Aug 19, 2011 6:46 am

Postby williamconley » Fri Aug 19, 2011 10:53 am

Admin->Conferences->Show VICIDIAL Conferences

Are they there? (8600051->8600299) and are they assigned to the correct IP address?
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20018
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Thanks William!

Postby root2 » Mon Aug 22, 2011 4:24 pm

First of all, I'd like to thank you so much for you help William.

I went to the vici conference on the admin panel and it should only 8600001 has an assigned ip and the rest are still in the default (192.168.1.2).

How do I go about in changing it? also, I already tried logging in to the agent interface and was able to log in but not connecting to eyebeam 1.5 (i don't hear "your the only in this conference" or even a ring). Just the agent screen and some of the errors listed below.

*There is a time synchronization problem with your system, please tell your system administrator - (Server is already set to NY-EST)

*Logged in as User: agent002 on Phone: SIP/8002 to campaign: 115
*No one is in your session: 8600001


ON THE ADMIN PANEL (Vici Conference)
CONFERENCE SERVER IP EXTENSION MODIFY
8600001 192.168.1.105 SIP/8002 MODIFY
8600051 192.168.1.2 MODIFY


Things done already
-Updated IP adress on the admin panel
-Changed server IP in admin/phones
-Eyebeam registering and can manual dial out and can connect to other extensions.
-Created campaign
-Loaded leads in csv format (comma delimited)--> it's shows as dialable leads but no leads in the hopper (already set to 24 hours and also tried force reset).

STATUS STATUS NAME CALLED NOT CALLED
NEW New Lead 0 91

This campaign has 0 leads in the dial hopper.

=============================
# screen -list
17787.ASTVDremote (Detached)
17778.ASTsend (Detached)
2988.goautodial_d (Detached)
3008 ASTfastlog (Detached)
17784.ASTVDauto (Detached)
2735.asterisk (Detached)
3005.ASTVadapt (Detached)
7 sockets in /var/run/screen/S-root
=============================

I hope all these would help solve my problem. Thanks again!



:D
root2
 
Posts: 20
Joined: Fri Aug 19, 2011 6:46 am

Postby williamconley » Mon Aug 22, 2011 7:33 pm

Look in the Getting Started Guide in the GoAutoDial Wiki for instructions on changing the IP address.

You can also use the script for changing the IP address provided in the Vicidial scripts folder:

Code: Select all
cd /usr/share/astguiclient
perl ADMIN_update_server_ip.pl


Then you will need to enter both the old and new IP addresses. Run it once for each "old" address that may have been used. It does not hurt to run this script more than once, or to run it with an IP the server never actually had. In case you aren't sure ... run it one time for each "possible" IP.
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20018
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Postby root2 » Sun Aug 28, 2011 3:52 am

Thanks William for the hand!

I sticked with the deafault ip (192.168.1.2) and everything worked.
root2
 
Posts: 20
Joined: Fri Aug 19, 2011 6:46 am

Postby scenarist » Mon Aug 29, 2011 5:08 am

I have the same problem like @root2
I checked Admin > Conference > Show conference > Show VICIDIAL Conference and I can't change to my default IP address. When I click to modify > change IP and click submit > VICIDIAL CONFERENCE MODIFIED: 8600051 but again under Show vicidial conference I don't see changes.(server ip and extension is empty!)
I have been change default IP to my IP , also I run above script to change IP but nothing.
When I try to login with:
Phone login: 8021
Phone password:goautodial
User login:myagent021
Pass login:goautdial
choose campaign:my campaign
and click LOGIN, my softphone ringing (incoming call from: S110829120101) and when I answered I have got voice message:
"I am sorry that is not valid extension, please try again"
My CLI shows me the following
Code: Select all
[Aug 29 12:06:51]   == Parsing '/etc/asterisk/manager.conf': [Aug 29 12:06:51] Found
[Aug 29 12:06:51]   == Manager 'sendcron' logged on from 127.0.0.1
[Aug 29 12:06:57]        > Channel SIP/8021-00000013 was answered.
[Aug 29 12:06:57]   == Starting SIP/8021-00000013 at default,,1 failed so falling back to exten 's'
[Aug 29 12:06:57]   == Starting SIP/8021-00000013 at default,s,1 still failed so falling back to context 'default'
[Aug 29 12:06:57]     -- Sent into invalid extension 's' in context 'default' on SIP/8021-00000013
[Aug 29 12:06:57]     -- Executing [i@default:1] Playback("SIP/8021-00000013", "invalid") in new stack
[Aug 29 12:06:57]     -- <SIP/8021-00000013> Playing 'invalid' (language 'en')
[Aug 29 12:06:59]   == Manager 'sendcron' logged off from 127.0.0.1
[Aug 29 12:07:01]   == Auto fallthrough, channel 'SIP/8021-00000013' status is 'UNKNOWN'
[Aug 29 12:07:01]     -- Executing [h@default:1] DeadAGI("SIP/8021-00000013", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16---------------") in new s

I also tried with another phone and user login but always I have the same problem.!? I created campaign , lists and load leads strictly according Manager Manual. In Campaigns > "my campaign" > shows me that is everything fine (note: I loaded only one leads for testing)
Code: Select all
This campaign has 1 active lists and 0 inactive lists

SHOW LEAD STATUSES IN THIS CAMPAIGN

This campaign has 1 leads to be dialed in those lists - HIDE

This campaign has 1 leads in the dial hopper
scenarist
 
Posts: 102
Joined: Mon May 23, 2011 2:53 am

update the server ip

Postby striker » Mon Aug 29, 2011 12:31 pm

hi

after changing the goautodial default ip192.168.1.2 to your another ip you need to run the update script.

go to goautodial admin page SYSTEM/NETWORK under drop down select UPDATE DATABASE IP

in oldserver ip select the ip from the drop down
in the new server ip enter your current server ip and press go


once done reboot the server
then login to the goautodial vicidail admin and check wether conference nos took the current server ip as serverip.

still it is not updated with the current server ip then run the below command in linux console

/usr/share/goautodial/ADMIN_update_server_ip.pl

enter the old ip and new ip detials

after that check the vicidal conference server ip.

if still it is not shows the server ip for the conferences then follow the below method

1.in linux console type mysql -p
2. password:vicidialnow
3. mysql>use asterisk
4. mysql >UPDATE conferences SET server_ip='your current serverip' where server_ip='';
5. mysql>UPDATE vicidial_conferences SET server_ip='your currentserverip' where server_ip='';
6. quit

note : replace the you current server ip to your server ip address
for eg if ur server ip is 10.10.10.100
then
use mysql>UPDATE conferences SET server_ip='10.10.10.100' where server_ip='';
www.striker24x7.com www.youtube.com/c/striker24x7 Telegram/skype id : striker24x7
striker
 
Posts: 962
Joined: Sun Jun 06, 2010 10:25 am

Postby scenarist » Tue Aug 30, 2011 2:47 am

Thanks @Striker

I solved my problem with last method. Now everything is ok!
scenarist
 
Posts: 102
Joined: Mon May 23, 2011 2:53 am

Goautodial only worked for a week

Postby root2 » Thu Sep 08, 2011 7:50 pm

My goautodial 2.1 only worked for a week then it won't distribute calls or dials It only shows ringing and no calls coming to the agents.

After I did a fresh install and did not change the default ip 192.168.1.2 everything worked until today.

Here are the errors on the logs


[Sep 7 19:11:29] VERBOSE[18062] logger.c: [Sep 7 19:11:29] -- AGI Script agi://127.0.0.1:4577/call_log--HVcauses ... ---------- completed, returning 0
[Sep 7 19:11:29] VERBOSE[18063] logger.c: [Sep 7 19:11:29] == Spawn extension (default, 8309, 3) exited non-zero on 'Local/58600051@default-86c8,1'
[Sep 7 19:11:29] VERBOSE[18063] logger.c: [Sep 7 19:11:29] -- Executing [h@default:1] DeadAGI("Local/58600051@default-86c8,1", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0---------------") in new stack
[Sep 7 19:11:29] VERBOSE[18063] logger.c: [Sep 7 19:11:29] -- AGI Script agi://127.0.0.1:4577/call_log--HVcauses ... ---------- completed, returning 0
[Sep 7 19:11:29] VERBOSE[18437] logger.c: [Sep 7 19:11:29] == Parsing '/etc/asterisk/manager.conf': [Sep 7 19:11:29] VERBOSE[18437] logger.c: [Sep 7 19:11:29] Found
[Sep 7 19:11:29] VERBOSE[18437] logger.c: [Sep 7 19:11:29] == Manager 'sendcron' logged on from 127.0.0.1
[Sep 7 19:11:29] VERBOSE[18438] logger.c: [Sep 7 19:11:29] == Parsing '/etc/asterisk/manager.conf': [Sep 7 19:11:29] VERBOSE[18438] logger.c: [Sep 7 19:11:29] Found
[Sep 7 19:11:29] VERBOSE[18438] logger.c: [Sep 7 19:11:29] == Manager 'sendcron' logged on from 127.0.0.1
[Sep 7 19:11:31] VERBOSE[18424] logger.c: [Sep 7 19:11:31] == Manager 'sendcron' logged off from 127.0.0.1
[Sep 7 19:11:31] VERBOSE[18429] logger.c: [Sep 7 19:11:31] == Manager 'sendcron' logged off from 127.0.0.1
[Sep 7 19:11:31] VERBOSE[18437] logger.c: [Sep 7 19:11:31] == Manager 'sendcron' logged off from 127.0.0.1
[Sep 7 19:11:31] VERBOSE[18438] logger.c: [Sep 7 19:11:31] == Manager 'sendcron' logged off from 127.0.0.1
[Sep 7 19:12:01] VERBOSE[18868] logger.c: [Sep 7 19:12:01] == Parsing '/etc/asterisk/manager.conf': [Sep 7 19:12:01] VERBOSE[18868] logger.c: [Sep 7 19:12:01] Found
[Sep 7 19:12:01] VERBOSE[18868] logger.c: [Sep 7 19:12:01] == Manager 'sendcron' logged on from 127.0.0.1
[Sep 7 19:12:01] VERBOSE[18869] logger.c: [Sep 7 19:12:01] == Parsing '/etc/asterisk/manager.conf': [Sep 7 19:12:01] VERBOSE[18869] logger.c: [Sep 7 19:12:01] Found
[Sep 7 19:12:01] VERBOSE[18869] logger.c: [Sep 7 19:12:01] == Manager 'sendcron' logged on from 127.0.0.1
[Sep 7 19:12:01] VERBOSE[18868] logger.c: [Sep 7 19:12:01] == Manager 'sendcron' logged off from 127.0.0.1
[Sep 7 19:12:02] VERBOSE[18941] logger.c: [Sep 7 19:12:02] == Parsing '/etc/asterisk/manager.conf': [Sep 7 19:12:02] VERBOSE[18941] logger.c: [Sep 7 19:12:02] Found
[Sep 7 19:12:02] VERBOSE[18941] logger.c: [Sep 7 19:12:02] == Manager 'sendcron' logged on from 127.0.0.1
[Sep 7 19:12:02] VERBOSE[18942] logger.c: [Sep 7 19:12:02] -- Executing [919123542157@default:1] AGI("Local/919123542157@default-b93b,2", "agi://127.0.0.1:4577/call_log") in new stack
[Sep 7 19:12:02] VERBOSE[18942] logger.c: [Sep 7 19:12:02] -- AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
[Sep 7 19:12:02] VERBOSE[18942] logger.c: [Sep 7 19:12:02] -- Executing [919123542157@default:2] Dial("Local/919123542157@default-b93b,2", "SIP/19123542157@goautodial||tTo") in new stack
[Sep 7 19:12:02] VERBOSE[18942] logger.c: [Sep 7 19:12:02] -- Called 19123542157@goautodial
[Sep 7 19:12:02] VERBOSE[18944] logger.c: [Sep 7 19:12:02] == Parsing '/etc/asterisk/manager.conf': [Sep 7 19:12:02] VERBOSE[18944] logger.c: [Sep 7 19:12:02] Found
[Sep 7 19:12:02] VERBOSE[18944] logger.c: [Sep 7 19:12:02] == Manager 'sendcron' logged on from 127.0.0.1
[Sep 7 19:12:02] VERBOSE[18945] logger.c: [Sep 7 19:12:02] -- Executing [915618442157@default:1] AGI("Local/915618442157@default-cebd,2", "agi://127.0.0.1:4577/call_log") in new stack
[Sep 7 19:12:02] VERBOSE[18945] logger.c: [Sep 7 19:12:02] -- AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
[Sep 7 19:12:02] VERBOSE[18945] logger.c: [Sep 7 19:12:02] -- Executing [915618442157@default:2] Dial("Local/915618442157@default-cebd,2", "SIP/15618442157@goautodial||tTo") in new stack
[Sep 7 19:12:02] VERBOSE[18945] logger.c: [Sep 7 19:12:02] -- Called 15618442157@goautodial
[Sep 7 19:12:03] ERROR[17909] utils.c: write() returned error: Broken pipe
[Sep 7 19:12:03] ERROR[17909] utils.c: write() returned error: Broken pipe
[Sep 7 19:12:03] ERROR[17909] utils.c: write() returned error: Broken pipe
[Sep 7 19:12:03] VERBOSE[17909] logger.c: [Sep 7 19:12:03] == Manager 'sendcron' logged off from 127.0.0.1
[Sep 7 19:12:03] VERBOSE[17910] logger.c: [Sep 7 19:12:03] == Spawn extension (default, 912395742157, 2) exited non-zero on 'Local/912395742157@default-462d,2'
[Sep 7 19:12:03] VERBOSE[17910] logger.c: [Sep 7 19:12:03] -- Executing [h@default:1] DeadAGI("Local/912395742157@default-462d,2", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0-----CANCEL----------") in new stack
[Sep 7 19:12:03] VERBOSE[17910] logger.c: [Sep 7 19:12:03] -- AGI Script agi://127.0.0.1:4577/call_log--HVcauses ... ---------- completed, returning 0
[Sep 7 19:12:03] ERROR[17916] utils.c: write() returned error: Broken pipe
[Sep 7 19:12:03] ERROR[17916] utils.c: write() returned error: Broken pipe
[Sep 7 19:12:03] ERROR[17916] utils.c: write() returned error: Broken pipe
[Sep 7 19:12:03] VERBOSE[17916] logger.c: [Sep 7 19:12:03] == Manager 'sendcron' logged off from 127.0.0.1
[Sep 7 19:12:03] VERBOSE[17917] logger.c: [Sep 7 19:12:03] == Spawn extension (default, 918653542157, 2) exited non-zero on 'Local/918653542157@default-f804,2'
[Sep 7 19:12:03] VERBOSE[17917] logger.c: [Sep 7 19:12:03] -- Executing [h@default:1] DeadAGI("Local/918653542157@default-f804,2", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0-----CANCEL----------") in new stack
[Sep 7 19:12:03] VERBOSE[17917] logger.c: [Sep 7 19:12:03] -- AGI Script agi://127.0.0.1:4577/call_log--HVcauses ... ---------- completed, returning 0
[Sep 7 19:12:03] VERBOSE[18869] logger.c: [Sep 7 19:12:03] == Manager 'sendcron' logged off from 127.0.0.1
[Sep 7 19:12:04] VERBOSE[18942] logger.c: [Sep 7 19:12:04] -- SIP/goautodial-000000e8 is making progress passing it to Local/919123542157@default-b93b,2
[Sep 7 19:12:04] VERBOSE[18945] logger.c: [Sep 7 19:12:04] -- SIP/goautodial-000000e9 is ringing
[Sep 7 19:12:06] VERBOSE[18990] logger.c: [Sep 7 19:12:06] == Parsing '/etc/asterisk/manager.conf': [Sep 7 19:12:06] VERBOSE[18990] logger.c: [Sep 7 19:12:06] Found
[Sep 7 19:12:06] VERBOSE[18990] logger.c: [Sep 7 19:12:06] == Manager 'sendcron' logged on from 127.0.0.1
[Sep 7 19:12:06] VERBOSE[18990] logger.c: [Sep 7 19:12:06] == Manager 'sendcron' logged off from 127.0.0.1
[Sep 7 19:12:26] VERBOSE[18945] logger.c: [Sep 7 19:12:26] -- SIP/goautodial-000000e9 answered Local/915618442157@default-cebd,2
[Sep 7 19:12:26] VERBOSE[18944] logger.c: [Sep 7 19:12:26] > Channel Local/915618442157@default-cebd,1 was answered.
[Sep 7 19:12:26] VERBOSE[18944] logger.c: [Sep 7 19:12:26] == Manager 'sendcron' logged off from 127.0.0.1
[Sep 7 19:12:26] VERBOSE[19273] logger.c: [Sep 7 19:12:26] -- Executing [8368@default:1] Playback("Local/915618442157@default-cebd,1", "sip-silence") in new stack
[Sep 7 19:12:26] VERBOSE[19273] logger.c: [Sep 7 19:12:26] -- Playing 'sip-silence' (language 'en')
[Sep 7 19:12:26] WARNING[19273] file.c: Unexpected control subclass '-1'
[Sep 7 19:12:26] VERBOSE[19273] logger.c: [Sep 7 19:12:26] -- Executing [8368@default:2] AGI("Local/915618442157@default-cebd,1", "agi://127.0.0.1:4577/call_log") in new stack
[Sep 7 19:12:26] VERBOSE[19273] logger.c: [Sep 7 19:12:26] -- AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
[Sep 7 19:12:26] VERBOSE[19273] logger.c: [Sep 7 19:12:26] -- Executing [8368@default:3] AGI("Local/915618442157@default-cebd,1", "agi-VDAD_ALL_outbound.agi|NORMAL-----LB") in new stack
[Sep 7 19:12:26] VERBOSE[19273] logger.c: [Sep 7 19:12:26] -- Launched AGI Script /var/lib/asterisk/agi-bin/agi-VDAD_ALL_outbound.agi
[Sep 7 19:12:27] VERBOSE[18945] logger.c: [Sep 7 19:12:27] -- Executing [h@default:1] DeadAGI("Local/915618442157@default-cebd,2", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----ANSWER-----25-----1") in new stack
[Sep 7 19:12:27] VERBOSE[18945] logger.c: [Sep 7 19:12:27] -- AGI Script agi://127.0.0.1:4577/call_log--HVcauses ... --25-----1 completed, returning 0
[Sep 7 19:12:27] VERBOSE[18945] logger.c: [Sep 7 19:12:27] == Spawn extension (default, 915618442157, 2) exited non-zero on 'Local/915618442157@default-cebd,2'
[Sep 7 19:12:27] VERBOSE[19273] logger.c: [Sep 7 19:12:27] -- AGI Script agi-VDAD_ALL_outbound.agi completed, returning 0
[Sep 7 19:12:27] VERBOSE[19273] logger.c: [Sep 7 19:12:27] -- Executing [8368@default:4] AGI("SIP/goautodial-000000e9", "agi-VDAD_ALL_outbound.agi|NORMAL-----LB") in new stack
[Sep 7 19:12:27] VERBOSE[19273] logger.c: [Sep 7 19:12:27] -- Launched AGI Script /var/lib/asterisk/agi-bin/agi-VDAD_ALL_outbound.agi
[Sep 7 19:12:28] ERROR[19273] utils.c: write() returned error: Broken pipe
[Sep 7 19:12:28] VERBOSE[19273] logger.c: [Sep 7 19:12:28] -- AGI Script agi-VDAD_ALL_outbound.agi completed, returning 0
[Sep 7 19:12:28] VERBOSE[19273] logger.c: [Sep 7 19:12:28] -- Executing [192*168*001*002*8600051@default:1] Goto("SIP/goautodial-000000e9", "default|8600051|1") in new stack
[Sep 7 19:12:28] VERBOSE[19273] logger.c: [Sep 7 19:12:28] -- Goto (default,8600051,1)
[Sep 7 19:12:28] VERBOSE[19273] logger.c: [Sep 7 19:12:28] -- Executing [8600051@default:1] MeetMe("SIP/goautodial-000000e9", "8600051|F") in new stack
[Sep 7 19:12:29] VERBOSE[19370] logger.c: [Sep 7 19:12:29] == Parsing '/etc/asterisk/manager.conf': [Sep 7 19:12:29] VERBOSE[19370] logger.c: [Sep 7 19:12:29] Found
[Sep 7 19:12:29] VERBOSE[19370] logger.c: [Sep 7 19:12:29] == Manager 'sendcron' logged on from 127.0.0.1
[Sep 7 19:12:29] VERBOSE[19371] logger.c: [Sep 7 19:12:29] -- Executing [58600051@default:1] MeetMe("Local/58600051@default-8eaa,2", "8600051|Fmq") in new stack
[Sep 7 19:12:29] VERBOSE[19370] logger.c: [Sep 7 19:12:29] > Channel Local/58600051@default-8eaa,1 was answered.
[Sep 7 19:12:29] VERBOSE[19372] logger.c: [Sep 7 19:12:29] -- Executing [8309@default:1] Answer("Local/58600051@default-8eaa,1", "") in new stack
[Sep 7 19:12:29] VERBOSE[19372] logger.c: [Sep 7 19:12:29] -- Executing [8309@default:2] Monitor("Local/58600051@default-8eaa,1", "wav|20110908-071227_5618442157") in new stack
[Sep 7 19:12:29] VERBOSE[19372] logger.c: [Sep 7 19:12:29] -- Executing [8309@default:3] Wait("Local/58600051@default-8eaa,1", "3600") in new stack
[Sep 7 19:12:31] VERBOSE[19370] logger.c: [Sep 7 19:12:31] == Manager 'sendcron' logged off from 127.0.0.1
[Sep 7 19:12:32] VERBOSE[19412] logger.c: [Sep 7 19:12:32] == Parsing '/etc/asterisk/manager.conf': [Sep 7 19:12:32] VERBOSE[19412] logger.c: [Sep 7 19:12:32] Found
[Sep 7 19:12:32] VERBOSE[19412] logger.c: [Sep 7 19:12:32] == Manager 'sendcron' logged on from 127.0.0.1
[Sep 7 19:12:32] WARNING[19273] app_meetme.c: Unable to write frame to channel SIP/goautodial-000000e9
[Sep 7 19:12:32] VERBOSE[19273] logger.c: [Sep 7 19:12:32] == Spawn extension (default, 8600051, 1) exited non-zero on 'SIP/goautodial-000000e9'
[Sep 7 19:12:32] VERBOSE[19273] logger.c: [Sep 7 19:12:32] -- Executing [h@default:1] DeadAGI("SIP/goautodial-000000e9", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0---------------") in new stack
[Sep 7 19:12:32] VERBOSE[19273] logger.c: [Sep 7 19:12:32] -- AGI Script agi://127.0.0.1:4577/call_log--HVcauses ... ---------- completed, returning 0
[Sep 7 19:12:32] VERBOSE[19417] logger.c: [Sep 7 19:12:32] == Parsing '/etc/asterisk/manager.conf': [Sep 7 19:12:32] VERBOSE[19417] logger.c: [Sep 7 19:12:32] Found
[Sep 7 19:12:32] VERBOSE[19417] logger.c: [Sep 7 19:12:32] == Manager 'sendcron' logged on from 127.0.0.1
[Sep 7 19:12:32] VERBOSE[19371] logger.c: [Sep 7 19:12:32] == Spawn extension (default, 58600051, 1) exited non-zero on 'Local/58600051@default-8eaa,2'
[Sep 7 19:12:32] VERBOSE[19371] logger.c: [Sep 7 19:12:32] -- Executing [h@default:1] DeadAGI("Local/58600051@default-8eaa,2", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0---------------") in new stack
[Sep 7 19:12:32] VERBOSE[19371] logger.c: [Sep 7 19:12:32] -- AGI Script agi://127.0.0.1:4577/call_log--HVcauses ... ---------- completed, returning 0
[Sep 7 19:12:32] VERBOSE[19372] logger.c: [Sep 7 19:12:32] == Spawn extension (default, 8309, 3) exited non-zero on 'Local/58600051@default-8eaa,1'
[Sep 7 19:12:32] VERBOSE[19372] logger.c: [Sep 7 19:12:32] -- Executing [h@default:1] DeadAGI("Local/58600051@default-8eaa,1", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0---------------") in new stack
[Sep 7 19:12:32] VERBOSE[19372] logger.c: [Sep 7 19:12:32] -- AGI Script agi://127.0.0.1:4577/call_log--HVcauses ... ---------- completed, returning 0
[Sep 7 19:12:32] VERBOSE[19422] logger.c: [Sep 7 19:12:32] == Parsing '/etc/asterisk/manager.conf': [Sep 7 19:12:32] VERBOSE[19422] logger.c: [Sep 7 19:12:32] Found
[Sep 7 19:12:32] VERBOSE[19422] logger.c: [Sep 7 19:12:32] == Manager 'sendcron' logged on from 127.0.0.1
[Sep 7 19:12:32] VERBOSE[19423] logger.c: [Sep 7 19:12:32] == Parsing '/etc/asterisk/manager.conf': [Sep 7 19:12:32] VERBOSE[19423] logger.c: [Sep 7 19:12:32] Found
[Sep 7 19:12:32] VERBOSE[19423] logger.c: [Sep 7 19:12:32] == Manager 'sendcron' logged on from 127.0.0.1
[Sep 7 19:12:34] VERBOSE[19412] logger.c: [Sep 7 19:12:34] == Manager 'sendcron' logged off from 127.0.0.1
[Sep 7 19:12:34] VERBOSE[19417] logger.c: [Sep 7 19:12:34] == Manager 'sendcron' logged off from 127.0.0.1
[Sep 7 19:12:34] VERBOSE[19422] logger.c: [Sep 7 19:12:34] == Manager 'sendcron' logged off from 127.0.0.1
[Sep 7 19:12:34] VERBOSE[19423] logger.c: [Sep 7 19:12:34] == Manager 'sendcron' logged off from 127.0.0.1
root2
 
Posts: 20
Joined: Fri Aug 19, 2011 6:46 am

Postby williamconley » Thu Sep 08, 2011 8:15 pm

apparently you had three calls, but only showed the start of two of them, and one of them answered, but they were all the same number. interesting.

how about this: put YOUR CELL PHONE in as a single number (the only number in a list) and just have the system call that one number with no other activity. see what the result (and CLI output) are from that attempt. (of course, you can change the phone number dialed to 5555555555 before posting!)
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20018
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: Goautodial 2.1 - Sorry, there are no available sessions

Postby anikallembi » Thu Dec 13, 2012 6:17 pm

thnx guys. i had the same problem and now seems to be solved thnx to your posts

best regards
anikallembi
 
Posts: 2
Joined: Wed Aug 29, 2012 10:52 am

Re: Goautodial 2.1 - Sorry, there are no available sessions

Postby rohit raj » Sat Jun 22, 2013 10:04 am

hello everyone

i have also faced same problem and finally problem got solved

session cannot create is just due to wrong time set on ur linux machine. i used centos and after so many changes it wasnt solved then i change time by running this command on superuser cmd-->date today date

here is the explanation to set date in centos
root@servername ~]# date

Output will be like Tue Aug 23 12:32:22 EDT 2011

Now to set the desired date/time use the same date command with an argument of your required date/time as following format;
date MMDDhhmmYYYY

MM – Two digits of month (e.g. 08)
DD – Two digits of day of month (e.g. 24)
hh – Two digits of hour 24 hours format (e.g. 22)
mm – Two digits of minutes (e.g. 40)
YYYY – Four digits of year (e.g. 2011)

So, to set a date/time for 24th August 2011, 10:40 PM you may run the command as below

[root@servername ~]# date 082422402011

finally i restart everything and then i log in and wipeeeeeeeeeeeeee session available and agent successfully log in

any query send me mail -->rrrohitraj0 on my gmail id
rohit raj
 
Posts: 10
Joined: Sat Jun 22, 2013 9:56 am

Re: Goautodial 2.1 - Sorry, there are no available sessions

Postby rohit raj » Sat Jun 22, 2013 11:07 am

and also make new vicidial conference which u fill find at admin-conference-create new vicidial conference id-->8600051...add ur server ip...then add extension in that way sip/extension no ex sip/8001. finally save ur vicidial conference .. now see all conference and delete that conference with same id u create which is 8600051. similarly u can make many one
rohit raj
 
Posts: 10
Joined: Sat Jun 22, 2013 9:56 am

Re: Goautodial 2.1 - Sorry, there are no available sessions

Postby williamconley » Sat Jun 22, 2013 2:55 pm

if you had to create a conference, then there was something wrong with your installation. perhaps you should start over and watch for errors during installation.
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20018
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: Goautodial 2.1 - Sorry, there are no available sessions

Postby rohit raj » Sat Jun 22, 2013 3:11 pm

i changed my server ip but all conference ip were not changed .... so deleted that conference with ip and made new...NOW WORKING FINE!!!
rohit raj
 
Posts: 10
Joined: Sat Jun 22, 2013 9:56 am

Re: Goautodial 2.1 - Sorry, there are no available sessions

Postby williamconley » Sat Jun 22, 2013 3:36 pm

when you change your ip, you are expected to use the admin server ip update script to modify the ip in all the necessary locations. if you change them one at a time it could take you a few weeks to find them all.

goautodial has a "menu item" that is expected to run this script for you, but vicibox just shows the script on the ssh splash screen so you can easily run in manually at any time without having to look it up. it requires a reboot after running anyway, so being in ssh is handy.
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20018
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: Goautodial 2.1 - Sorry, there are no available sessions

Postby rohit raj » Sat Jun 22, 2013 4:11 pm

but sir,

thats what i was saying that conference ip were not changed... so, i changed myself by creating same conference id with new ip and delete conference of old ip .... kind of CREATIVE IMPROVISATION heheheheh

i haven tried vicidial tilll but will use it sure
rohit raj
 
Posts: 10
Joined: Sat Jun 22, 2013 9:56 am

Re: Goautodial 2.1 - Sorry, there are no available sessions

Postby williamconley » Sat Jun 22, 2013 4:44 pm

If the conference IPs were not changed, you need to run that script. DID you run that script? At the command line?

Having one conference available is not likely to make you happy. And what other items were missed by whatever method you used?

Did you verify astguiclient.conf has the correct IP? (which would be set by the update server ip script, of course).
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20018
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: Goautodial 2.1 - Sorry, there are no available sessions

Postby rohit raj » Sun Jun 23, 2013 7:57 am

oh i didn run that command but i personally change every ip of astguiclient.conf. and currently i have 10 conferences and all are working fine. but yup you are right i didnt run the script thats why i have to create each and every conferences manually . i think i shud run that script now. and can u tell me how to external calling . i mean further process now .. any link
rohit raj
 
Posts: 10
Joined: Sat Jun 22, 2013 9:56 am

Re: Goautodial 2.1 - Sorry, there are no available sessions

Postby williamconley » Sun Jun 23, 2013 3:18 pm

DO run the script now. Run it with every "old" IP address this server may have had (it won't hurt to run it extra times). Reboot when done.

Then read the manual available at EFLO.net. Start at page one and do not skip ANYTHING. Seriously. When you are done with this Free Manager's Manual for this Free software, you'll have a functional system and will not have spent any money except for the VOIP provider (try Vitelity.com for a good carrier, but VOIPStreet.com has a lower "first payment" of $10).
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20018
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: Goautodial 2.1 - Sorry, there are no available sessions

Postby rohit raj » Mon Jun 24, 2013 11:58 am

ran script and then reboot...but nothing changed
rohit raj
 
Posts: 10
Joined: Sat Jun 22, 2013 9:56 am

Re: Goautodial 2.1 - Sorry, there are no available sessions

Postby williamconley » Mon Jun 24, 2013 9:26 pm

did you verify the correct ip in /etc/astguiclient.conf?

and in admin->servers?
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20018
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: Goautodial 2.1 - Sorry, there are no available sessions

Postby rohit raj » Tue Jun 25, 2013 10:27 am

over ther i already changed i m asking about vicidial conference IP

HOW TO CHANGE ALL CONFERENCE IP
rohit raj
 
Posts: 10
Joined: Sat Jun 22, 2013 9:56 am

Re: Goautodial 2.1 - Sorry, there are no available sessions

Postby striker » Tue Jun 25, 2013 11:28 am

run
/usr/share/astguiclient/ADMIN_update_server_ip.pl --old-server_ip=ipaddres-shows-in-conference
www.striker24x7.com www.youtube.com/c/striker24x7 Telegram/skype id : striker24x7
striker
 
Posts: 962
Joined: Sun Jun 06, 2010 10:25 am

Re: Goautodial 2.1 - Sorry, there are no available sessions

Postby rohit raj » Tue Jun 25, 2013 12:44 pm

sir, i ran this command but it didnt change any conference ip....so i made new conference myself.. i m looking script to change all my conference ip
rohit raj
 
Posts: 10
Joined: Sat Jun 22, 2013 9:56 am

Re: Goautodial 2.1 - Sorry, there are no available sessions

Postby striker » Tue Jun 25, 2013 1:12 pm

use the mysql command to update in the mysql console

UPDATE conferences SET server_ip='new-ip';
UPDATE vicidial_conferences SET server_ip='new-ip';
www.striker24x7.com www.youtube.com/c/striker24x7 Telegram/skype id : striker24x7
striker
 
Posts: 962
Joined: Sun Jun 06, 2010 10:25 am

Re: Goautodial 2.1 - Sorry, there are no available sessions

Postby rohit raj » Tue Jun 25, 2013 3:21 pm

this is the right command under myqul...

thank you STRIKE................ U ROCK!!!
rohit raj
 
Posts: 10
Joined: Sat Jun 22, 2013 9:56 am

Re: Goautodial 2.1 - Sorry, there are no available sessions

Postby RajArya » Fri Feb 09, 2018 2:03 pm

root2 wrote:Hi All!

I have just installed goautodial ver 2.1 (from scratch). I already did the following and also followed the steps in the "Getting Started Guide" and was able to manually dial out from another computer (soft phone connected to the server). But when I tried logging to the agent interface it's saying "Sorry, there are no available sessions".

I have already done the following:

1.Changed IP
2.Configured voip carrier
3.Created the Campaign and softphone extensions.
4.Created the a list and uploaded leads.

Seats: 5

Voip: Novatel

Hardware:
Intel Dual Core
2gig memory
500gig HD
Single lan



I hope this helps!



first you need to check conference there have surely ip changed,try to delete extension and create new one which you giving to choose server ip,and also make sure your dialer ip is same
RajArya
 
Posts: 3
Joined: Thu Oct 15, 2015 11:22 am

Re: Goautodial 2.1 - Sorry, there are no available sessions

Postby berrayahkamel » Thu Apr 08, 2021 10:51 pm

Hi
juste run /usr/share/astguiclient/ADMIN_update_server_ip.pl
many times ,
must put all old ip server every time


root2 wrote:Hi All!

I have just installed goautodial ver 2.1 (from scratch). I already did the following and also followed the steps in the "Getting Started Guide" and was able to manually dial out from another computer (soft phone connected to the server). But when I tried logging to the agent interface it's saying "Sorry, there are no available sessions".

I have already done the following:

1.Changed IP
2.Configured voip carrier
3.Created the Campaign and softphone extensions.
4.Created the a list and uploaded leads.

Seats: 5

Voip: Novatel

Hardware:
Intel Dual Core
2gig memory
500gig HD
Single lan



I hope this helps!
berrayahkamel
 
Posts: 10
Joined: Tue Apr 21, 2020 3:22 pm


Return to ViciDialNow - GoAutoDial

Who is online

Users browsing this forum: No registered users and 33 guests