There is a time synchronization problem with your system

General and Support topics relating to ViciDialNow and GoAutoDial ISO installers

Moderators: enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, s0lid

There is a time synchronization problem with your system

Postby vinodtcr » Fri Apr 30, 2010 6:40 am

We have been using Vicidialnow, VERSION: 2.0.5-174, for predictive dialing for last one week and all of a sudden it shows the error message "There is a time synchronization problem with your system, please tell your system administrator" whenever the agent logon to webclient interface. But manual dialing works fine.
Ntpd time synchronization is working fine with "pool&ntp&org".
We also reinstalled the entire system but after one week it shows the same problem.
Plz help.
vinodtcr
 
Posts: 4
Joined: Wed Feb 24, 2010 12:29 am

Postby omarrodriguezt » Fri Apr 30, 2010 10:59 am

Do you have the database in a different server?
If the answer is yes, make sure that both serves have the same time.

You can use this command: ntpdate -u x.x.x.x (ip address)
http://www.ITContinental.com
Dedicated USA Servers - Vicibox - Vicidial - Limesurvey - Vtiger CRM - More than 15 years experience - Hablamos Español
omarrodriguezt
 
Posts: 667
Joined: Fri Jun 05, 2009 12:22 pm
Location: Dominican Republic

Postby vinodtcr » Fri Apr 30, 2010 11:15 pm

omarrodriguezt wrote:Do you have the database in a different server?
If the answer is yes, make sure that both serves have the same time.

You can use this command: ntpdate -u x.x.x.x (ip address)


No. We use only one server and use SIP account from a provider from US to route calls. ntpdate and ntpd works fine..also tried same public ntp server to synchronize time of client systems and server. Time zone has also been set for 5.5 (India).
vinodtcr
 
Posts: 4
Joined: Wed Feb 24, 2010 12:29 am

Postby gardo » Sat May 01, 2010 3:40 am

You also need to synchronize your workstations. The date on both server and workstations should be the same.
http://goautodial.com
Empowering the next generation contact centers
gardo
 
Posts: 1926
Joined: Fri Sep 15, 2006 10:24 am
Location: Manila, 1004

Postby slasher » Mon May 03, 2010 2:33 pm

try to run this:


ln -sf /usr/share/zoneinfo/EST5EDT localtime
slasher
 
Posts: 4
Joined: Mon Feb 15, 2010 8:20 am

Re:

Postby THUFIR » Wed Mar 25, 2015 6:57 pm

gardo wrote:You also need to synchronize your workstations. The date on both server and workstations should be the same.



why?

What if the agent is remote?
ViciBox Redux v.6.0.3-141118 from .iso | Single Server | No Digium/Sangoma Hardware | No Extra Software After Installation | AMD Phenom(tm) II X6 1090T Processor | 8GiB RAM
THUFIR
 
Posts: 109
Joined: Fri May 02, 2014 10:46 pm

Re: There is a time synchronization problem with your system

Postby wonderwall » Fri Apr 10, 2015 12:07 am

installation of Goautodial 3.0 from Yum on CentOS release 5.10.1 (Final)
Installation method.
go autodial wiki 64 bit

Quad Processor 10 Core Westmere EX 4850 - 2.00GHz - 4 x 24MB cache
512 GB DDR3 Registered 1066
4TB x3 SATA III in RAID 5
wonderwall
 
Posts: 27
Joined: Sun Feb 09, 2014 2:54 pm


Return to ViciDialNow - GoAutoDial

Who is online

Users browsing this forum: No registered users and 29 guests