No Sound when CALLERID(name) is Set

All installation and configuration problems and questions

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

No Sound when CALLERID(name) is Set

Postby iboam » Thu Dec 02, 2021 11:59 pm

im setting a survey campaing and want to set a caller name and it works randomly but with no sound on the call
[XCAST]
disallow=all
allow=ulaw
allow=alaw
canreinvite=no
type=peer
host=xxx.xxx.xxx.xxx
dtmfmode=rfc2833
qualify=yes
nat=force_rport,comedia
insecure=port,invite
set sendrpid=pai



exten => _817NXXNXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _817NXXNXXXXXX,n,Set(CALLERID(name)="Test Name") If remove this part call works perfect but with no custom name, just the caller id number and/or vicidial iud as name
exten => _817NXXNXXXXXX,n,Set(CALLERID(number)=${CALLERID(num)})
exten => _817NXXNXXXXXX,n,SipAddHeader(P-Asserted-Identity: ${CALLERID(name)})
exten => _817NXXNXXXXXX,n,Dial(${XTRUNK}/1${EXTEN:3},,tTo)
exten => _817NXXNXXXXXX,n,Hangup
ViciBox: 11 | VERSION: 2.14-897a BUILD: 230927-0857 | Clusters: 1 DB-WEB-ASTX | SSL | WebRTC | Wallboard | DNC Nightly Scrubber
iboam
 
Posts: 257
Joined: Mon Feb 08, 2016 2:35 pm

Re: No Sound when CALLERID(name) is Set

Postby callcentertech » Mon Dec 13, 2021 2:52 pm

You should be better off without that line
exten => _817NXXNXXXXXX,n,Set(CALLERID(name)="Test Name") If remove this part call works perfect but with no custom name, just the caller id number and/or vicidial iud as name

I believe Xcast does not honour that input..
Email: kaushal@callcentertech.net, Phone/WhatsApp: +1 (636)-556-0022
Web: https://www.callcentertech.net, Skype: live:52956f35f3283f55
Fully Automated VICIdial Installer https://www.callcentertech.net/vicifast/
callcentertech
 
Posts: 48
Joined: Sat Jul 17, 2021 2:01 pm
Location: Ahmedabad, India

Re: No Sound when CALLERID(name) is Set

Postby iboam » Mon Dec 13, 2021 10:51 pm

I want to eliminate the call uid as caller name. Any carrier that you recommend ???
ViciBox: 11 | VERSION: 2.14-897a BUILD: 230927-0857 | Clusters: 1 DB-WEB-ASTX | SSL | WebRTC | Wallboard | DNC Nightly Scrubber
iboam
 
Posts: 257
Joined: Mon Feb 08, 2016 2:35 pm

Re: No Sound when CALLERID(name) is Set

Postby callcentertech » Tue Dec 14, 2021 12:32 am

Where do you see call uid appearing as Caller name. May be you can attach a screenshot from your switch..!!

iboam wrote:I want to eliminate the call uid as caller name. Any carrier that you recommend ???
Email: kaushal@callcentertech.net, Phone/WhatsApp: +1 (636)-556-0022
Web: https://www.callcentertech.net, Skype: live:52956f35f3283f55
Fully Automated VICIdial Installer https://www.callcentertech.net/vicifast/
callcentertech
 
Posts: 48
Joined: Sat Jul 17, 2021 2:01 pm
Location: Ahmedabad, India

Re: No Sound when CALLERID(name) is Set

Postby iboam » Tue Dec 14, 2021 10:13 am

As a caller id on my phone VXXXXXXXXXXXXXXXXXXXXXX
ViciBox: 11 | VERSION: 2.14-897a BUILD: 230927-0857 | Clusters: 1 DB-WEB-ASTX | SSL | WebRTC | Wallboard | DNC Nightly Scrubber
iboam
 
Posts: 257
Joined: Mon Feb 08, 2016 2:35 pm

Re: No Sound when CALLERID(name) is Set

Postby callcentertech » Fri Dec 17, 2021 10:31 am

Try this:
Set(CALLERID(name)=${CALLERID(num)})
Email: kaushal@callcentertech.net, Phone/WhatsApp: +1 (636)-556-0022
Web: https://www.callcentertech.net, Skype: live:52956f35f3283f55
Fully Automated VICIdial Installer https://www.callcentertech.net/vicifast/
callcentertech
 
Posts: 48
Joined: Sat Jul 17, 2021 2:01 pm
Location: Ahmedabad, India

Re: No Sound when CALLERID(name) is Set

Postby GenXOutsourcing » Mon Dec 20, 2021 6:38 pm

iboam wrote:I want to eliminate the call uid as caller name. Any carrier that you recommend ???


Tiltx can remove the Vicidial UID.

support@tiltx.com
Built too many to count, Centos7 Scratch install, Opensuse Scratch install, Centos8 Scratch install, etc.
Dual 8 core/32gb RAM/500gb SSDs
SVN Version:3440
VERSION: 2.14-812a
genxoutsourcing.com
GenXOutsourcing
 
Posts: 120
Joined: Sun Sep 22, 2019 12:53 am

Re: No Sound when CALLERID(name) is Set

Postby mflorell » Mon Dec 20, 2021 9:51 pm

You can also do this with OpenSIPs on your own fairly easily.
mflorell
Site Admin
 
Posts: 18335
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida


Return to Support

Who is online

Users browsing this forum: Bing [Bot], Google [Bot] and 51 guests