all calls i make are saying NA. Please help

All installation and configuration problems and questions

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

all calls i make are saying NA. Please help

Postby sdctelcom » Tue Oct 28, 2014 4:03 pm

I recently installed vicibox on a new server. I have it configured where i can use a soft phone to make an outbound call but when i log in as an agent and turn a campaign on all of the leads come up with a disposition of NA.

Carrier Settings

[SDC]
disallow=all
allow=ulaw
allow=alaw
canreinvite=no
dtmfmode=rfc2833
host=xx.xxx.xx.xx
insecure=invite
port=5060
qualify=yes
type=peer

exten => _91NXXNXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _91NXXNXXXXXX,2,Dial(SIP/SDC/${EXTEN:1},,tTor)
exten => _91NXXNXXXXXX,3,Hangup

exten => _81NXXNXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _81NXXNXXXXXX,2,Dial(SIP/SDC/${EXTEN:1},,tTor)
exten => _81NXXNXXXXXX,3,Hangup

exten => _1NXXNXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _1NXXNXXXXXX,2,Dial(SIP/SDC/${EXTEN:0},,tTor)
exten => _1NXXNXXXXXX,3,Hangup


I have the campaign setup as ratio with an autodial of 200. It is also setup to do a survey(press1)

Please anything to help.
sdctelcom
 
Posts: 8
Joined: Tue Oct 28, 2014 3:53 pm

Re: all calls i make are saying NA. Please help

Postby geoff3dmg » Wed Oct 29, 2014 7:53 am

That is not how you use the Dial application. It should be:

Dial(SIP/${EXTEN:0}@VoIPCarrier,,tTor)

Fix this and try again. Then I would check the carrier log and the asterisk logs to check what you get back from your carrier when you try and dial.
Vicibox 5.03 from .iso | VERSION: 2.10-451a BUILD: 140902-0816 | Asterisk 1.8.28.2-vici | Multi-Server | Amfeltec H/W Timing Cards | No Extra Software After Installation | Dell PowerEdge 1850 | Pentium 4 'Prescott' Xenon Quad @ 3.40GHz
geoff3dmg
 
Posts: 403
Joined: Tue Jan 29, 2013 4:35 am
Location: Lancashire, UK

Re: all calls i make are saying NA. Please help

Postby sdctelcom » Wed Oct 29, 2014 1:42 pm

i am getting the error


[Oct 29 14:41:34] WARNING[11444]: app_dial.c:2345 dial_exec_full: Unable to create channel of type 'DAHDI' (cause 0 - Unknown)
sdctelcom
 
Posts: 8
Joined: Tue Oct 28, 2014 3:53 pm

Re: all calls i make are saying NA. Please help

Postby geoff3dmg » Thu Oct 30, 2014 4:30 am

Are your DADHI drivers loading?
Vicibox 5.03 from .iso | VERSION: 2.10-451a BUILD: 140902-0816 | Asterisk 1.8.28.2-vici | Multi-Server | Amfeltec H/W Timing Cards | No Extra Software After Installation | Dell PowerEdge 1850 | Pentium 4 'Prescott' Xenon Quad @ 3.40GHz
geoff3dmg
 
Posts: 403
Joined: Tue Jan 29, 2013 4:35 am
Location: Lancashire, UK

Re: all calls i make are saying NA. Please help

Postby striker » Thu Oct 30, 2014 6:25 am

post your full cli log while make a call....
www.striker24x7.com www.youtube.com/c/striker24x7 Telegram/skype id : striker24x7
striker
 
Posts: 962
Joined: Sun Jun 06, 2010 10:25 am

Re: all calls i make are saying NA. Please help

Postby sdctelcom » Thu Oct 30, 2014 8:46 am

[url]here is the full log.. and i am checking on the drivers also

[Oct 30 09:42:07] -- Executing [h@default:1] AGI("Local/919092067692@default-000000b4;2", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----CHANUNAVAIL----------") in new stack
[Oct 30 09:42:07] == Manager 'sendcron' logged on from 127.0.0.1
[Oct 30 09:42:07] -- Executing [912069403372@default:1] AGI("Local/912069403372@default-000000b5;2", "agi://127.0.0.1:4577/call_log") in new stack
[Oct 30 09:42:07] -- AGI Script Executing Application: (EXEC) Options: (Set(_CAMPCUST=123))
[Oct 30 09:42:07] -- <Local/912069403372@default-000000b5;2>AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
[Oct 30 09:42:07] -- Executing [912069403372@default:2] Dial("Local/912069403372@default-000000b5;2", "DAHDI/r2/12069403372,,To") in new stack
[Oct 30 09:42:07] WARNING[23287]: app_dial.c:2345 dial_exec_full: Unable to create channel of type 'DAHDI' (cause 0 - Unknown)
[Oct 30 09:42:07] == Everyone is busy/congested at this time (1:0/0/1)
[Oct 30 09:42:07] -- Executing [912069403372@default:3] Hangup("Local/912069403372@default-000000b5;2", "") in new stack
[Oct 30 09:42:07] == Spawn extension (default, 912069403372, 3) exited non-zero on 'Local/912069403372@default-000000b5;2'
[Oct 30 09:42:07] -- Executing [h@default:1] AGI("Local/912069403372@default-000000b5;2", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----CHANUNAVAIL----------") in new stack
[Oct 30 09:42:07] -- <Local/917185873294@default-00000091;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----CHANUNAVAIL---------- completed, returning 0
[Oct 30 09:42:07] == Manager 'sendcron' logged on from 127.0.0.1
[Oct 30 09:42:07] -- Executing [912094858352@default:1] AGI("Local/912094858352@default-000000b6;2", "agi://127.0.0.1:4577/call_log") in new stack
[Oct 30 09:42:07] -- AGI Script Executing Application: (EXEC) Options: (Set(_CAMPCUST=123))
[Oct 30 09:42:07] -- <Local/912094858352@default-000000b6;2>AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
[Oct 30 09:42:07] -- Executing [912094858352@default:2] Dial("Local/912094858352@default-000000b6;2", "DAHDI/r2/12094858352,,To") in new stack
[Oct 30 09:42:07] WARNING[23289]: app_dial.c:2345 dial_exec_full: Unable to create channel of type 'DAHDI' (cause 0 - Unknown)
[Oct 30 09:42:07] == Everyone is busy/congested at this time (1:0/0/1)
[Oct 30 09:42:07] -- Executing [912094858352@default:3] Hangup("Local/912094858352@default-000000b6;2", "") in new stack
[Oct 30 09:42:07] == Spawn extension (default, 912094858352, 3) exited non-zero on 'Local/912094858352@default-000000b6;2'
[Oct 30 09:42:07] -- Executing [h@default:1] AGI("Local/912094858352@default-000000b6;2", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----CHANUNAVAIL----------") in new stack
[Oct 30 09:42:07] -- <Local/919312074125@default-00000092;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----CHANUNAVAIL---------- completed, returning 0
[Oct 30 09:42:07] == Manager 'sendcron' logged on from 127.0.0.1
[Oct 30 09:42:07] -- Executing [912068871618@default:1] AGI("Local/912068871618@default-000000b7;2", "agi://127.0.0.1:4577/call_log") in new stack
[Oct 30 09:42:07] -- AGI Script Executing Application: (EXEC) Options: (Set(_CAMPCUST=123))
[Oct 30 09:42:07] -- <Local/912068871618@default-000000b7;2>AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
[Oct 30 09:42:07] -- Executing [912068871618@default:2] Dial("Local/912068871618@default-000000b7;2", "DAHDI/r2/12068871618,,To") in new stack
[Oct 30 09:42:07] WARNING[23291]: app_dial.c:2345 dial_exec_full: Unable to create channel of type 'DAHDI' (cause 0 - Unknown)
[Oct 30 09:42:07] == Everyone is busy/congested at this time (1:0/0/1)
[Oct 30 09:42:07] -- Executing [912068871618@default:3] Hangup("Local/912068871618@default-000000b7;2", "") in new stack
[Oct 30 09:42:07] == Spawn extension (default, 912068871618, 3) exited non-zero on 'Local/912068871618@default-000000b7;2'
[Oct 30 09:42:07] -- Executing [h@default:1] AGI("Local/912068871618@default-000000b7;2", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----CHANUNAVAIL----------") in new stack
[Oct 30 09:42:07] -- <Local/912127906000@default-00000093;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----CHANUNAVAIL---------- completed, returning 0
[Oct 30 09:42:07] -- <Local/917183993070@default-00000094;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----CHANUNAVAIL---------- completed, returning 0
[Oct 30 09:42:07] -- <Local/915626884903@default-00000095;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----CHANUNAVAIL---------- completed, returning 0
[Oct 30 09:42:07] -- <Local/914065875426@default-00000096;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----CHANUNAVAIL---------- completed, returning 0
[Oct 30 09:42:07] -- <Local/913474955603@default-00000097;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----CHANUNAVAIL---------- completed, returning 0
[Oct 30 09:42:07] -- <Local/913252037330@default-00000098;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----CHANUNAVAIL---------- completed, returning 0
[Oct 30 09:42:07] -- <Local/919034919523@default-00000099;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----CHANUNAVAIL---------- completed, returning 0
[Oct 30 09:42:08] -- <Local/916083977120@default-0000009a;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----CHANUNAVAIL---------- completed, returning 0
[Oct 30 09:42:08] -- <Local/917636399805@default-0000009b;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----CHANUNAVAIL---------- completed, returning 0
[Oct 30 09:42:08] -- <Local/912034918203@default-0000009c;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----CHANUNAVAIL---------- completed, returning 0
[Oct 30 09:42:08] -- <Local/916416426786@default-0000009d;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----CHANUNAVAIL---------- completed, returning 0
[Oct 30 09:42:08] -- <Local/915735690469@default-0000009e;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----CHANUNAVAIL---------- completed, returning 0
[Oct 30 09:42:08] -- <Local/914795440029@default-0000009f;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----CHANUNAVAIL---------- completed, returning 0
[Oct 30 09:42:08] -- <Local/915732865255@default-000000a0;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----CHANUNAVAIL---------- completed, returning 0
[Oct 30 09:42:08] -- <Local/916602380767@default-000000a1;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----CHANUNAVAIL---------- completed, returning 0
[Oct 30 09:42:08] -- <Local/916602215994@default-000000a2;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----CHANUNAVAIL---------- completed, returning 0
[Oct 30 09:42:08] -- <Local/914027210131@default-000000a3;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----CHANUNAVAIL---------- completed, returning 0
[Oct 30 09:42:08] -- <Local/914023454768@default-000000a4;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----CHANUNAVAIL---------- completed, returning 0
[Oct 30 09:42:08] -- <Local/919044857161@default-000000a5;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----CHANUNAVAIL---------- completed, returning 0
[Oct 30 09:42:08] -- <Local/919132320456@default-000000a6;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----CHANUNAVAIL---------- completed, returning 0
[Oct 30 09:42:08] -- <Local/913163375367@default-000000a7;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----CHANUNAVAIL---------- completed, returning 0
[Oct 30 09:42:08] -- <Local/916208754840@default-000000a8;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----CHANUNAVAIL---------- completed, returning 0
[Oct 30 09:42:08] -- <Local/913073331899@default-000000a9;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----CHANUNAVAIL---------- completed, returning 0
[Oct 30 09:42:08] -- <Local/917205692744@default-000000aa;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----CHANUNAVAIL---------- completed, returning 0
[Oct 30 09:42:08] -- <Local/917209804712@default-000000ab;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----CHANUNAVAIL---------- completed, returning 0
[Oct 30 09:42:08] -- <Local/919702708801@default-000000ac;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----CHANUNAVAIL---------- completed, returning 0
[Oct 30 09:42:08] -- <Local/913072203649@default-000000ad;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----CHANUNAVAIL---------- completed, returning 0
[Oct 30 09:42:08] == Manager 'sendcron' logged off from 127.0.0.1
[Oct 30 09:42:08] -- <Local/918016629847@default-000000ae;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----CHANUNAVAIL---------- completed, returning 0
[Oct 30 09:42:08] == Manager 'sendcron' logged off from 127.0.0.1
[Oct 30 09:42:08] -- <Local/914806591436@default-000000af;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----CHANUNAVAIL---------- completed, returning 0
[Oct 30 09:42:08] == Manager 'sendcron' logged off from 127.0.0.1
[Oct 30 09:42:08] -- <Local/914357201425@default-000000b0;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----CHANUNAVAIL---------- completed, returning 0
[Oct 30 09:42:08] == Manager 'sendcron' logged off from 127.0.0.1
[Oct 30 09:42:08] -- <Local/919162560910@default-000000b1;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----CHANUNAVAIL---------- completed, returning 0
[Oct 30 09:42:08] -- <Local/917134464639@default-000000b2;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----CHANUNAVAIL---------- completed, returning 0
[Oct 30 09:42:08] -- <Local/916822399563@default-000000b3;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----CHANUNAVAIL---------- completed, returning 0
[Oct 30 09:42:08] == Manager 'sendcron' logged off from 127.0.0.1
[Oct 30 09:42:08] == Manager 'sendcron' logged off from 127.0.0.1
[Oct 30 09:42:08] == Manager 'sendcron' logged off from 127.0.0.1
[Oct 30 09:42:08] -- <Local/919092067692@default-000000b4;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----CHANUNAVAIL---------- completed, returning 0
[Oct 30 09:42:08] == Manager 'sendcron' logged off from 127.0.0.1
[Oct 30 09:42:08] -- <Local/912069403372@default-000000b5;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----CHANUNAVAIL---------- completed, returning 0
[Oct 30 09:42:08] -- <Local/912094858352@default-000000b6;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----CHANUNAVAIL---------- completed, returning 0
[Oct 30 09:42:08] == Manager 'sendcron' logged off from 127.0.0.1
[Oct 30 09:42:08] -- <Local/912068871618@default-000000b7;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----CHANUNAVAIL---------- completed, returning 0
[Oct 30 09:42:08] == Manager 'sendcron' logged off from 127.0.0.1

vici1*CLI>[/url]
sdctelcom
 
Posts: 8
Joined: Tue Oct 28, 2014 3:53 pm

Re: all calls i make are saying NA. Please help

Postby striker » Thu Oct 30, 2014 10:56 am

type the below in cli and post back the result

dialplan show 912069403372@default


are you using SIP turnk or PRI/E1 trunk
www.striker24x7.com www.youtube.com/c/striker24x7 Telegram/skype id : striker24x7
striker
 
Posts: 962
Joined: Sun Jun 06, 2010 10:25 am

Re: all calls i make are saying NA. Please help

Postby sdctelcom » Thu Oct 30, 2014 11:07 am

I am using SIP.. Below are the results

[ Context 'default' created by 'pbx_config' ]
'_91NXXNXXXXXX' => 1. AGI(agi://127.0.0.1:4577/call_log) [pbx_config]
2. Dial(${TRUNKX}/${EXTEN:1},,To) [pbx_config]
3. Hangup() [pbx_config]
[ Included context 'vicidial-auto-external' created by 'pbx_config' ]
'_91NXXNXXXXXX' => 1. AGI(agi://127.0.0.1:4577/call_log) [pbx_config]
2. Dial(SIP/67.228.13.43:5060,20) [pbx_config]
3. Hangup() [pbx_config]


-= 2 extensions (6 priorities) in 2 contexts. =-
sdctelcom
 
Posts: 8
Joined: Tue Oct 28, 2014 3:53 pm

Re: all calls i make are saying NA. Please help

Postby striker » Thu Oct 30, 2014 11:12 am

goto vi /etc/asterisk/extensions.conf

remove the dialplan
_91NXXNXXXXXX' => 1. AGI(agi://127.0.0.1:4577/call_log) [pbx_config]
2. Dial(${TRUNKX}/${EXTEN:1},,To) [pbx_config]
3. Hangup() [pbx_config]


under default context
and reload the server and check the calls
www.striker24x7.com www.youtube.com/c/striker24x7 Telegram/skype id : striker24x7
striker
 
Posts: 962
Joined: Sun Jun 06, 2010 10:25 am

Re: all calls i make are saying NA. Please help

Postby sdctelcom » Thu Oct 30, 2014 12:17 pm

okay that seemed to get the phone ringing and i appreciate that. But now im doing 2 test calls to my cell and office line. when i call my cell it just rings and rings but doesnt ring my cell. and when i call the office line it rings and when i try to answer i get a dial tone but it continues to ring on the softphone.
sdctelcom
 
Posts: 8
Joined: Tue Oct 28, 2014 3:53 pm

Re: all calls i make are saying NA. Please help

Postby sdctelcom » Thu Oct 30, 2014 12:40 pm

ok take back last statement, i just tried calling through campaign and not just softphone and the error i got is

[Oct 30 13:36:22] WARNING[6098]: chan_sip.c:21133 handle_response_invite: Received response: "Forbidden" from '"V0301336200000003853" <sip:3302376656@98.249.153.233>;tag=as7ff5acf2'
sdctelcom
 
Posts: 8
Joined: Tue Oct 28, 2014 3:53 pm

Re: all calls i make are saying NA. Please help

Postby sdctelcom » Thu Oct 30, 2014 12:59 pm

ok i have the last one fixed, apparantly the dialer thought i was trying to call india.

so back to same issue, i just ran my office line through the campaign and it just rings and then hangs up when i answer it.any idea whats causing this?
sdctelcom
 
Posts: 8
Joined: Tue Oct 28, 2014 3:53 pm

Re: all calls i make are saying NA. Please help

Postby paolo » Tue Nov 04, 2014 1:51 pm

Hi,

Based on experience

== Everyone is busy/congested at this time (1:0/0/1)
[Oct 30 09:42:07] -- Executing [912068871618@default:3] Hangup("Local/912068871618@default-000000b7;2", "") in new stack
[Oct 30 09:42:07] == Spawn extension (default, 912068871618, 3) exited non-zero on 'Local/912068871618@default-000000b7;2'


I usually get this error when the telco is down.

Have you tried calling your telco to check if they are up or down

do you have other carriers configured in your system.

Tried isolating the issue by disabling and testing the carriers set up on your server one by one.
MyCallCloud.com - Cool Vici Customizations - Hosted - Configured - Supported
Web: https://mycallcloud.com
P: 888-663-0760
E: sales@mycallcloud.com
paolo
 
Posts: 48
Joined: Wed Oct 08, 2014 11:38 am


Return to Support

Who is online

Users browsing this forum: No registered users and 155 guests