Local channel not created after answering call

All installation and configuration problems and questions

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

Local channel not created after answering call

Postby nysander » Tue Jul 29, 2014 4:17 pm

I have installed plain vicibox 6.0 server and test on it two usb dongles. I got problem after customer answers call it is connected to agent but conference channel (Local) it is not created.

as a result is that agent cannot hungup call and message "Customer has hung up" after 33 seconds on every call. Call is going on and customer is the only one who can hung it. This behaviour was not visible on goautodial plain install as I have in signature.

below I post screenshot from agent screen after answering call by customer.

goo.gl/ZPA86z <<<<<<< I cannot attach url / image

I do not know which logs could help in debuging this problem. So please write.

I hope you can help me as it is not possible for me now to put this box on production.
now:
[vicidial]: ViciBox 6.0 Ast 1.8.29.0-vici | vd-2.10-448a-140706-0927 ------ SIP connected to GSM Gateway
[GSM Gateway]: Asterisk 1.8.29.0 | chan_dongle-1.1.r14 | 7x Huawei Dongles (E156G, E169, E1550 voice enabled)
nysander
 
Posts: 52
Joined: Wed Jul 23, 2014 5:06 am

Re: Local channel not created after answering call

Postby nysander » Tue Jul 29, 2014 6:54 pm

I can add that when I make manual call Local channel is created and open whole time the call is on. Call is not disconnected until end. Hunging it up works from both sides.
now:
[vicidial]: ViciBox 6.0 Ast 1.8.29.0-vici | vd-2.10-448a-140706-0927 ------ SIP connected to GSM Gateway
[GSM Gateway]: Asterisk 1.8.29.0 | chan_dongle-1.1.r14 | 7x Huawei Dongles (E156G, E169, E1550 voice enabled)
nysander
 
Posts: 52
Joined: Wed Jul 23, 2014 5:06 am

Re: Local channel not created after answering call

Postby nysander » Wed Jul 30, 2014 9:28 am

I have also testing campaign on manual dialing (above was manual entering number and press dial) and it is also working without problem, local is created. I can end it when I want.

so problem is in autodialing mode.
now:
[vicidial]: ViciBox 6.0 Ast 1.8.29.0-vici | vd-2.10-448a-140706-0927 ------ SIP connected to GSM Gateway
[GSM Gateway]: Asterisk 1.8.29.0 | chan_dongle-1.1.r14 | 7x Huawei Dongles (E156G, E169, E1550 voice enabled)
nysander
 
Posts: 52
Joined: Wed Jul 23, 2014 5:06 am

Re: Local channel not created after answering call

Postby nysander » Wed Jul 30, 2014 9:47 am

I have found in other topic that Playback is done on my autodial calling but it was there not confirmed if this can be a cause of my problems

[Jul 30 05:17:46] -- Called Dongle/g1/505000000
[Jul 30 05:17:46] -- Dongle/dongle0-0100000008 is making progress passing it to Local/48505000000@default-00000010;2
[Jul 30 05:17:55] -- Dongle/dongle0-0100000008 answered Local/48505000000@default-00000010;2
[Jul 30 05:17:55] > Channel Local/48505000000@default-00000010;1 was answered.
[Jul 30 05:17:55] -- Executing [8367@default:1] Playback("Local/48505000000@default-00000010;1", "sip-silence") in new stack
[Jul 30 05:17:55] -- <Local/48505000000@default-00000010;1> Playing 'sip-silence.gsm' (language 'pl')

[Jul 30 05:17:55] -- Executing [h@default:1] AGI("Local/48505000000@default-00000010;2", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----ANSWER-----10-----0") in new stack
[Jul 30 05:17:55] -- Executing [8367@default:2] AGI("Dongle/dongle0-0100000008", "agi://127.0.0.1:4577/call_log") in new stack
[Jul 30 05:17:55] -- AGI Script Executing Application: (EXEC) Options: (Set(_CAMPCUST=334))
[Jul 30 05:17:55] -- <Dongle/dongle0-0100000008>AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
[Jul 30 05:17:55] -- Executing [8367@default:3] AGI("Dongle/dongle0-0100000008", "agi-VDAD_ALL_outbound.agi,NORMAL-----LO") in new stack
[Jul 30 05:17:55] -- Launched AGI Script /usr/share/asterisk/agi-bin/agi-VDAD_ALL_outbound.agi
[Jul 30 05:17:55] -- <Dongle/dongle0-0100000008>AGI Script agi-VDAD_ALL_outbound.agi completed, returning 0
[Jul 30 05:17:55] -- Executing [8600051@default:1] MeetMe("Dongle/dongle0-0100000008", "8600051,F") in new stack
[Jul 30 05:17:56] == Manager 'sendcron' logged off from 127.0.0.1
[Jul 30 05:17:56] -- <Local/48505000000@default-00000010;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses ... --10-----0 completed, returning 0
[Jul 30 05:17:56] == Spawn extension (default, 48505000000, 2) exited non-zero on 'Local/48505000000@default-00000010;2'
[Jul 30 05:18:01] == Manager 'sendcron' logged on from 127.0.0.1
[Jul 30 05:18:01] == Manager 'sendcron' logged on from 127.0.0.1
[Jul 30 05:18:01] == Manager 'sendcron' logged off from 127.0.0.1
[Jul 30 05:18:01] == Manager 'sendcron' logged off from 127.0.0.1
[Jul 30 05:18:06] == Manager 'sendcron' logged on from 127.0.0.1
[Jul 30 05:18:06] == Manager 'sendcron' logged off from 127.0.0.1
[Jul 30 05:18:38] == Spawn extension (default, 8600051, 1) exited non-zero on 'Dongle/dongle0-0100000008'
[Jul 30 05:18:38] -- Executing [h@default:1] AGI("Dongle/dongle0-0100000008", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16---------------") in new stack
[Jul 30 05:18:38] -- <Dongle/dongle0-0100000008>AGI Script agi://127.0.0.1:4577/call_log--HVcauses ... ---------- completed, returning 0


can someone help?
now:
[vicidial]: ViciBox 6.0 Ast 1.8.29.0-vici | vd-2.10-448a-140706-0927 ------ SIP connected to GSM Gateway
[GSM Gateway]: Asterisk 1.8.29.0 | chan_dongle-1.1.r14 | 7x Huawei Dongles (E156G, E169, E1550 voice enabled)
nysander
 
Posts: 52
Joined: Wed Jul 23, 2014 5:06 am

Re: Local channel not created after answering call

Postby nysander » Sun Aug 03, 2014 4:50 am

In debug logs I have found that Local channel is marked as ZOMBIE just after creation and hang up is send to it

but in meetme conference call is visible


Code: Select all
Conf Num       Parties        Marked     Activity  Creation  Locked
8600051        0002           N/A        00:01:53  Static    No
* Total number of MeetMe users: 2


after call is closed by customer parties changes to 1
now:
[vicidial]: ViciBox 6.0 Ast 1.8.29.0-vici | vd-2.10-448a-140706-0927 ------ SIP connected to GSM Gateway
[GSM Gateway]: Asterisk 1.8.29.0 | chan_dongle-1.1.r14 | 7x Huawei Dongles (E156G, E169, E1550 voice enabled)
nysander
 
Posts: 52
Joined: Wed Jul 23, 2014 5:06 am

Re: Local channel not created after answering call

Postby nysander » Sun Aug 03, 2014 9:28 am

this is my last try to debug this and I hope for your help.

below is full asterisk messages log (verbose 20 debug 10) from start of asterisk, logging of agent, doing one failed AutoDial call, end stop of asterisk

https://drive.google.com/file/d/0Bytaww ... sp=sharing

please help
now:
[vicidial]: ViciBox 6.0 Ast 1.8.29.0-vici | vd-2.10-448a-140706-0927 ------ SIP connected to GSM Gateway
[GSM Gateway]: Asterisk 1.8.29.0 | chan_dongle-1.1.r14 | 7x Huawei Dongles (E156G, E169, E1550 voice enabled)
nysander
 
Posts: 52
Joined: Wed Jul 23, 2014 5:06 am

Re: Local channel not created after answering call

Postby williamconley » Sun Aug 03, 2014 2:03 pm

not really prepared to read that much information.

could you post JUST the relevent asterisk cli? from one "good" and one "bad" call. start at the moment the call starts, and end when it ends. probably 20 lines for each call.
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20018
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: Local channel not created after answering call

Postby nysander » Sun Aug 03, 2014 2:51 pm

I paste a little more with agi debug on

bad call:
Code: Select all
[Aug  3 21:09:54]     -- Executing [91548505000000@default:1] AGI("Local/91548505000000@default-00000004;2", "agi://127.0.0.1:4577/call_log") in new stack
[Aug  3 21:09:54] AGI Tx >> agi_network: yes
[Aug  3 21:09:54] AGI Tx >> agi_network_script: call_log
[Aug  3 21:09:54] <Local/91548505000000@default-00000004;2>AGI Tx >> agi_request: agi://127.0.0.1:4577/call_log
[Aug  3 21:09:54] <Local/91548505000000@default-00000004;2>AGI Tx >> agi_channel: Local/91548505000000@default-00000004;2
[Aug  3 21:09:54] <Local/91548505000000@default-00000004;2>AGI Tx >> agi_language: en
[Aug  3 21:09:54] <Local/91548505000000@default-00000004;2>AGI Tx >> agi_type: Local
[Aug  3 21:09:54] <Local/91548505000000@default-00000004;2>AGI Tx >> agi_uniqueid: 1407092994.15
[Aug  3 21:09:54] <Local/91548505000000@default-00000004;2>AGI Tx >> agi_version: 1.8.29.0-vici
[Aug  3 21:09:54] <Local/91548505000000@default-00000004;2>AGI Tx >> agi_callerid: 412000000
[Aug  3 21:09:54] <Local/91548505000000@default-00000004;2>AGI Tx >> agi_calleridname: V8032109540000000145
[Aug  3 21:09:54] <Local/91548505000000@default-00000004;2>AGI Tx >> agi_callingpres: 0
[Aug  3 21:09:54] <Local/91548505000000@default-00000004;2>AGI Tx >> agi_callingani2: 0
[Aug  3 21:09:54] <Local/91548505000000@default-00000004;2>AGI Tx >> agi_callington: 0
[Aug  3 21:09:54] <Local/91548505000000@default-00000004;2>AGI Tx >> agi_callingtns: 0
[Aug  3 21:09:54] <Local/91548505000000@default-00000004;2>AGI Tx >> agi_dnid: unknown
[Aug  3 21:09:54] <Local/91548505000000@default-00000004;2>AGI Tx >> agi_rdnis: unknown
[Aug  3 21:09:54] <Local/91548505000000@default-00000004;2>AGI Tx >> agi_context: default
[Aug  3 21:09:54] <Local/91548505000000@default-00000004;2>AGI Tx >> agi_extension: 91548505000000
[Aug  3 21:09:54] <Local/91548505000000@default-00000004;2>AGI Tx >> agi_priority: 1
[Aug  3 21:09:54] <Local/91548505000000@default-00000004;2>AGI Tx >> agi_enhanced: 0.0
[Aug  3 21:09:54] <Local/91548505000000@default-00000004;2>AGI Tx >> agi_accountcode:
[Aug  3 21:09:54] <Local/91548505000000@default-00000004;2>AGI Tx >> agi_threadid: 140304031184640
[Aug  3 21:09:54] <Local/91548505000000@default-00000004;2>AGI Tx >>
[Aug  3 21:09:54] <Local/91548505000000@default-00000004;2>AGI Rx << EXEC EXEC Set(_CAMPCUST=TEST) ""
[Aug  3 21:09:54]     -- AGI Script Executing Application: (EXEC) Options: (Set(_CAMPCUST=TEST))
[Aug  3 21:09:54] <Local/91548505000000@default-00000004;2>AGI Tx >> 200 result=0
[Aug  3 21:09:54]     -- <Local/91548505000000@default-00000004;2>AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
[Aug  3 21:09:54] <Local/91548505000000@default-00000004;2>AGI Tx >> HANGUP
[Aug  3 21:09:54]     -- Executing [91548505000000@default:2] Dial("Local/91548505000000@default-00000004;2", "Dongle/dongle0/48505000000,20,oTtr") in new stack
[Aug  3 21:09:54]     -- Called Dongle/dongle0/48505000000
[Aug  3 21:09:54]     -- Dongle/dongle0-0100000004 is making progress passing it to Local/91548505000000@default-00000004;2
[Aug  3 21:10:01]   == Manager 'sendcron' logged on from 127.0.0.1
[Aug  3 21:10:01]   == Manager 'sendcron' logged on from 127.0.0.1
[Aug  3 21:10:01]   == Manager 'sendcron' logged off from 127.0.0.1
[Aug  3 21:10:01]   == Manager 'sendcron' logged off from 127.0.0.1
[Aug  3 21:10:02]     -- Dongle/dongle0-0100000004 answered Local/91548505000000@default-00000004;2
[Aug  3 21:10:02]        > Channel Local/91548505000000@default-00000004;1 was answered.
[Aug  3 21:10:02]     -- Executing [8365@default:1] Playback("Local/91548505000000@default-00000004;1", "sip-silence") in new stack
[Aug  3 21:10:02]     -- <Local/91548505000000@default-00000004;1> Playing 'sip-silence.gsm' (language 'en')
[Aug  3 21:10:02]     -- Executing [8365@default:2] AGI("Local/91548505000000@default-00000004;1", "agi://127.0.0.1:4577/call_log") in new stack
[Aug  3 21:10:02]     -- Executing [h@default:1] AGI("Local/91548505000000@default-00000004;2", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----ANSWER-----8-----0") in new stack
[Aug  3 21:10:02] AGI Tx >> agi_network: yes
[Aug  3 21:10:02] AGI Tx >> agi_network_script: call_log--HVcauses--PRI-----NODEBUG-----16-----ANSWER-----8-----0
[Aug  3 21:10:02] <Local/91548505000000@default-00000004;2>AGI Tx >> agi_request: agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----ANSWER-----8-----0
[Aug  3 21:10:02] <Local/91548505000000@default-00000004;2>AGI Tx >> agi_channel: Local/91548505000000@default-00000004;2
[Aug  3 21:10:02] <Local/91548505000000@default-00000004;2>AGI Tx >> agi_language: en
[Aug  3 21:10:02] <Local/91548505000000@default-00000004;2>AGI Tx >> agi_type: Local
[Aug  3 21:10:02] <Local/91548505000000@default-00000004;2>AGI Tx >> agi_uniqueid: 1407092994.15
[Aug  3 21:10:02] <Local/91548505000000@default-00000004;2>AGI Tx >> agi_version: 1.8.29.0-vici
[Aug  3 21:10:02] <Local/91548505000000@default-00000004;2>AGI Tx >> agi_callerid: 412000000
[Aug  3 21:10:02] <Local/91548505000000@default-00000004;2>AGI Tx >> agi_calleridname: V8032109540000000145
[Aug  3 21:10:02] <Local/91548505000000@default-00000004;2>AGI Tx >> agi_callingpres: 0
[Aug  3 21:10:02] <Local/91548505000000@default-00000004;2>AGI Tx >> agi_callingani2: 0
[Aug  3 21:10:02] <Local/91548505000000@default-00000004;2>AGI Tx >> agi_callington: 0
[Aug  3 21:10:02] <Local/91548505000000@default-00000004;2>AGI Tx >> agi_callingtns: 0
[Aug  3 21:10:02] <Local/91548505000000@default-00000004;2>AGI Tx >> agi_dnid: unknown
[Aug  3 21:10:02] <Local/91548505000000@default-00000004;2>AGI Tx >> agi_rdnis: unknown
[Aug  3 21:10:02] <Local/91548505000000@default-00000004;2>AGI Tx >> agi_context: default
[Aug  3 21:10:02] <Local/91548505000000@default-00000004;2>AGI Tx >> agi_extension: h
[Aug  3 21:10:02] <Local/91548505000000@default-00000004;2>AGI Tx >> agi_priority: 1
[Aug  3 21:10:02] <Local/91548505000000@default-00000004;2>AGI Tx >> agi_enhanced: 0.0
[Aug  3 21:10:02] <Local/91548505000000@default-00000004;2>AGI Tx >> agi_accountcode:
[Aug  3 21:10:02] <Local/91548505000000@default-00000004;2>AGI Tx >> agi_threadid: 140304031184640
[Aug  3 21:10:02] <Local/91548505000000@default-00000004;2>AGI Tx >>
[Aug  3 21:10:02] AGI Tx >> agi_network: yes
[Aug  3 21:10:02] AGI Tx >> agi_network_script: call_log
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> agi_request: agi://127.0.0.1:4577/call_log
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> agi_channel: Dongle/dongle0-0100000004
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> agi_language: en
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> agi_type: Dongle
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> agi_uniqueid: 1407092994.14
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> agi_version: 1.8.29.0-vici
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> agi_callerid: 412000000
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> agi_calleridname: V8032109540000000145
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> agi_callingpres: 0
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> agi_callingani2: 0
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> agi_callington: 0
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> agi_callingtns: 0
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> agi_dnid: unknown
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> agi_rdnis: unknown
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> agi_context: default
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> agi_extension: 8365
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> agi_priority: 2
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> agi_enhanced: 0.0
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> agi_accountcode:
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> agi_threadid: 140304030168832
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >>
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Rx << EXEC EXEC Set(_CAMPCUST=TEST) ""
[Aug  3 21:10:02]     -- AGI Script Executing Application: (EXEC) Options: (Set(_CAMPCUST=TEST))
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> 200 result=0
[Aug  3 21:10:02]     -- <Dongle/dongle0-0100000004>AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> HANGUP
[Aug  3 21:10:02]     -- Executing [8365@default:3] AGI("Dongle/dongle0-0100000004", "agi-VDAD_ALL_outbound.agi,NORMAL-----SO") in new stack
[Aug  3 21:10:02]     -- Launched AGI Script /usr/share/asterisk/agi-bin/agi-VDAD_ALL_outbound.agi
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> agi_request: agi-VDAD_ALL_outbound.agi
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> agi_channel: Dongle/dongle0-0100000004
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> agi_language: en
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> agi_type: Dongle
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> agi_uniqueid: 1407092994.14
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> agi_version: 1.8.29.0-vici
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> agi_callerid: 412000000
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> agi_calleridname: V8032109540000000145
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> agi_callingpres: 0
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> agi_callingani2: 0
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> agi_callington: 0
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> agi_callingtns: 0
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> agi_dnid: unknown
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> agi_rdnis: unknown
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> agi_context: default
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> agi_extension: 8365
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> agi_priority: 3
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> agi_enhanced: 0.0
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> agi_accountcode:
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> agi_threadid: 140304030168832
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> agi_arg_1: NORMAL-----SO
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >>
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Rx << SET CALLERID V8032109540000000145
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> 200 result=1
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Rx << CHANNEL STATUS Dongle/dongle0-0100000004
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> 200 result=6
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Rx << SET CALLERID "V8032109540000000145 <>"
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> 200 result=1
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Rx << SET CONTEXT default
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> 200 result=0
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Rx << SET EXTENSION 8600051
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> 200 result=0
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Rx << SET PRIORITY 1
[Aug  3 21:10:02] <Dongle/dongle0-0100000004>AGI Tx >> 200 result=0
[Aug  3 21:10:02]     -- <Dongle/dongle0-0100000004>AGI Script agi-VDAD_ALL_outbound.agi completed, returning 0
[Aug  3 21:10:02]     -- Executing [8600051@default:1] MeetMe("Dongle/dongle0-0100000004", "8600051,F") in new stack
[Aug  3 21:10:03]   == Manager 'sendcron' logged off from 127.0.0.1
[Aug  3 21:10:03]     -- <Local/91548505000000@default-00000004;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----ANSWER-----8-----0 completed, returning 0
[Aug  3 21:10:03] <Local/91548505000000@default-00000004;2>AGI Tx >> HANGUP
[Aug  3 21:10:03]   == Spawn extension (default, 91548505000000, 2) exited non-zero on 'Local/91548505000000@default-00000004;2'
[Aug  3 21:10:06]   == Manager 'sendcron' logged on from 127.0.0.1
[Aug  3 21:10:06]   == Manager 'sendcron' logged off from 127.0.0.1
[Aug  3 21:10:14]   == Spawn extension (default, 8600051, 1) exited non-zero on 'Dongle/dongle0-0100000004'
[Aug  3 21:10:14]     -- Executing [h@default:1] AGI("Dongle/dongle0-0100000004", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16---------------") in new stack
[Aug  3 21:10:14] AGI Tx >> agi_network: yes
[Aug  3 21:10:14] AGI Tx >> agi_network_script: call_log--HVcauses--PRI-----NODEBUG-----16---------------
[Aug  3 21:10:14] <Dongle/dongle0-0100000004>AGI Tx >> agi_request: agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16---------------
[Aug  3 21:10:14] <Dongle/dongle0-0100000004>AGI Tx >> agi_channel: Dongle/dongle0-0100000004
[Aug  3 21:10:14] <Dongle/dongle0-0100000004>AGI Tx >> agi_language: en
[Aug  3 21:10:14] <Dongle/dongle0-0100000004>AGI Tx >> agi_type: Dongle
[Aug  3 21:10:14] <Dongle/dongle0-0100000004>AGI Tx >> agi_uniqueid: 1407092994.14
[Aug  3 21:10:14] <Dongle/dongle0-0100000004>AGI Tx >> agi_version: 1.8.29.0-vici
[Aug  3 21:10:14] <Dongle/dongle0-0100000004>AGI Tx >> agi_callerid: unknown
[Aug  3 21:10:14] <Dongle/dongle0-0100000004>AGI Tx >> agi_calleridname: V8032109540000000145
[Aug  3 21:10:14] <Dongle/dongle0-0100000004>AGI Tx >> agi_callingpres: 0
[Aug  3 21:10:14] <Dongle/dongle0-0100000004>AGI Tx >> agi_callingani2: 0
[Aug  3 21:10:14] <Dongle/dongle0-0100000004>AGI Tx >> agi_callington: 0
[Aug  3 21:10:14] <Dongle/dongle0-0100000004>AGI Tx >> agi_callingtns: 0
[Aug  3 21:10:14] <Dongle/dongle0-0100000004>AGI Tx >> agi_dnid: unknown
[Aug  3 21:10:14] <Dongle/dongle0-0100000004>AGI Tx >> agi_rdnis: unknown
[Aug  3 21:10:14] <Dongle/dongle0-0100000004>AGI Tx >> agi_context: default
[Aug  3 21:10:14] <Dongle/dongle0-0100000004>AGI Tx >> agi_extension: h
[Aug  3 21:10:14] <Dongle/dongle0-0100000004>AGI Tx >> agi_priority: 1
[Aug  3 21:10:14] <Dongle/dongle0-0100000004>AGI Tx >> agi_enhanced: 0.0
[Aug  3 21:10:14] <Dongle/dongle0-0100000004>AGI Tx >> agi_accountcode:
[Aug  3 21:10:14] <Dongle/dongle0-0100000004>AGI Tx >> agi_threadid: 140304030168832
[Aug  3 21:10:14] <Dongle/dongle0-0100000004>AGI Tx >>
[Aug  3 21:10:14]     -- <Dongle/dongle0-0100000004>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16--------------- completed, returning 0
[Aug  3 21:10:14] <Dongle/dongle0-0100000004>AGI Tx >> HANGUP
now:
[vicidial]: ViciBox 6.0 Ast 1.8.29.0-vici | vd-2.10-448a-140706-0927 ------ SIP connected to GSM Gateway
[GSM Gateway]: Asterisk 1.8.29.0 | chan_dongle-1.1.r14 | 7x Huawei Dongles (E156G, E169, E1550 voice enabled)
nysander
 
Posts: 52
Joined: Wed Jul 23, 2014 5:06 am

Re: Local channel not created after answering call

Postby williamconley » Sun Aug 03, 2014 3:13 pm

Cool, but I didn't ask for "more" (ie: not yet interested in agi debugging) and I did ask for a "good" and a "bad" preferably segregated for easy identification and comparison.

Also: Why 8365 instead of 8368 (default)?

Also: Did you test this with SIP before moving on to Dongle?
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20018
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: Local channel not created after answering call

Postby nysander » Sun Aug 03, 2014 3:35 pm

yes I have tested sip and it was working ... till today ... today is broken and I have no idea why (just turned it off in carriers and reloaded sip / dialplan) so today I have no good call log unfortunatelly. Tomorrow I will be debugging sip.

I have tested 8368 8367 8365 and on every of it result was the same.

I will provide current SIP good log as fast as possible but tomorrow, late night in my timezone now.
now:
[vicidial]: ViciBox 6.0 Ast 1.8.29.0-vici | vd-2.10-448a-140706-0927 ------ SIP connected to GSM Gateway
[GSM Gateway]: Asterisk 1.8.29.0 | chan_dongle-1.1.r14 | 7x Huawei Dongles (E156G, E169, E1550 voice enabled)
nysander
 
Posts: 52
Joined: Wed Jul 23, 2014 5:06 am

Re: Local channel not created after answering call

Postby williamconley » Sun Aug 03, 2014 5:03 pm

I didn't ask for a current good sip log. I asked for a good and bad example of dongle for comparison to one another. I also asked if you had used sip (in an outbound campaign) to be sure your dialer works properly aside from your dongle issue.
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20018
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: Local channel not created after answering call

Postby nysander » Sun Aug 03, 2014 5:21 pm

probably during finding some solution to make work both carriers I've broken whole config. I need to restore it and then I will paste working SIP (good) and then probably not working (bad) Dongle as it was after initial(plain clean) vicidial setup before.
now:
[vicidial]: ViciBox 6.0 Ast 1.8.29.0-vici | vd-2.10-448a-140706-0927 ------ SIP connected to GSM Gateway
[GSM Gateway]: Asterisk 1.8.29.0 | chan_dongle-1.1.r14 | 7x Huawei Dongles (E156G, E169, E1550 voice enabled)
nysander
 
Posts: 52
Joined: Wed Jul 23, 2014 5:06 am

Re: Local channel not created after answering call

Postby nysander » Sun Aug 03, 2014 7:27 pm

ok William, I had to remove old configuration and start from plain vicibox config. results are the same. SIP works, Dongle not. Below are my results.

bad call via Dongle (chan_dongle)

Code: Select all
    -- Executing [91548505000000@default:1] AGI("Local/91548505000000@default-00000007;2", "agi://127.0.0.1:4577/call_log") in new stack
    -- AGI Script Executing Application: (EXEC) Options: (Set(_CAMPCUST=TEST))
    -- <Local/91548505000000@default-00000007;2>AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
    -- Executing [91548505000000@default:2] Dial("Local/91548505000000@default-00000007;2", "Dongle/g1/505000000,20,Ttor") in new stack
    -- Called Dongle/g1/505000000
    -- Dongle/dongle0-0100000001 is making progress passing it to Local/91548505000000@default-00000007;2
    -- Dongle/dongle0-0100000001 answered Local/91548505000000@default-00000007;2
       > Channel Local/91548505000000@default-00000007;1 was answered.
    -- Executing [8368@default:1] Playback("Local/91548505000000@default-00000007;1", "sip-silence") in new stack
    -- <Local/91548505000000@default-00000007;1> Playing 'sip-silence.gsm' (language 'en')
    -- Executing [8368@default:2] AGI("Local/91548505000000@default-00000007;1", "agi://127.0.0.1:4577/call_log") in new stack
    -- AGI Script Executing Application: (EXEC) Options: (Set(_CAMPCUST=TEST))
    -- <Local/91548505000000@default-00000007;1>AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
    -- Executing [8368@default:3] AGI("Local/91548505000000@default-00000007;1", "agi-VDAD_ALL_outbound.agi,NORMAL-----LB") in new stack
    -- Executing [h@default:1] AGI("Local/91548505000000@default-00000007;2", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----ANSWER-----9-----0") in new stack
    -- Launched AGI Script /usr/share/asterisk/agi-bin/agi-VDAD_ALL_outbound.agi
    -- <Dongle/dongle0-0100000001>AGI Script agi-VDAD_ALL_outbound.agi completed, returning 0
    -- Executing [192*168*001*033*8600051@default:1] Goto("Dongle/dongle0-0100000001", "default,8600051,1") in new stack
    -- Goto (default,8600051,1)
    -- Executing [8600051@default:1] MeetMe("Dongle/dongle0-0100000001", "8600051,F") in new stack
  == Manager 'sendcron' logged off from 127.0.0.1
    -- <Local/91548505000000@default-00000007;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----ANSWER-----9-----0 completed, returning 0
  == Spawn extension (default, 91548505000000, 2) exited non-zero on 'Local/91548505000000@default-00000007;2'
       > Refreshing DNS lookups.
  == Manager 'sendcron' logged on from 127.0.0.1
  == Manager 'sendcron' logged on from 127.0.0.1
  == Manager 'sendcron' logged off from 127.0.0.1
  == Spawn extension (default, 8600051, 1) exited non-zero on 'Dongle/dongle0-0100000001'
    -- Executing [h@default:1] AGI("Dongle/dongle0-0100000001", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16---------------") in new stack
    -- <Dongle/dongle0-0100000001>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16--------------- completed, returning 0



good call via SIP provider

Code: Select all
    -- Executing [91548505000000@default:1] AGI("Local/91548505000000@default-00000008;2", "agi://127.0.0.1:4577/call_log") in new stack
    -- AGI Script Executing Application: (EXEC) Options: (Set(_CAMPCUST=TEST))
    -- <Local/91548505000000@default-00000008;2>AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
    -- Executing [91548505000000@default:2] SIPAddHeader("Local/91548505000000@default-00000008;2", "X-Fid: ") in new stack
    -- Executing [91548505000000@default:3] Dial("Local/91548505000000@default-00000008;2", "SIP/505000000@ipfon,30,tTo") in new stack
  == Using SIP RTP CoS mark 5
    -- Called SIP/505000000@ipfon
    -- SIP/ipfon-00000005 is making progress passing it to Local/91548505000000@default-00000008;2
    -- SIP/ipfon-00000005 answered Local/91548505000000@default-00000008;2
       > Channel Local/91548505000000@default-00000008;1 was answered.
    -- Executing [8368@default:1] Playback("Local/91548505000000@default-00000008;1", "sip-silence") in new stack
    -- <Local/91548505000000@default-00000008;1> Playing 'sip-silence.gsm' (language 'en')
    -- Executing [h@default:1] AGI("Local/91548505000000@default-00000008;2", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----ANSWER-----11-----0") in new stack
    -- Executing [8368@default:2] AGI("SIP/ipfon-00000005", "agi://127.0.0.1:4577/call_log") in new stack
    -- AGI Script Executing Application: (EXEC) Options: (Set(_CAMPCUST=TEST))
    -- <SIP/ipfon-00000005>AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
    -- Executing [8368@default:3] AGI("SIP/ipfon-00000005", "agi-VDAD_ALL_outbound.agi,NORMAL-----LB") in new stack
    -- Launched AGI Script /usr/share/asterisk/agi-bin/agi-VDAD_ALL_outbound.agi
    -- <SIP/ipfon-00000005>AGI Script agi-VDAD_ALL_outbound.agi completed, returning 0
    -- Executing [192*168*001*033*8600051@default:1] Goto("SIP/ipfon-00000005", "default,8600051,1") in new stack
    -- Goto (default,8600051,1)
    -- Executing [8600051@default:1] MeetMe("SIP/ipfon-00000005", "8600051,F") in new stack
  == Manager 'sendcron' logged off from 127.0.0.1
    -- <Local/91548505000000@default-00000008;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----ANSWER-----11-----0 completed, returning 0
  == Spawn extension (default, 91548505000000, 3) exited non-zero on 'Local/91548505000000@default-00000008;2'
  == Manager 'sendcron' logged on from 127.0.0.1
  == Manager 'sendcron' logged off from 127.0.0.1
  == Manager 'sendcron' logged on from 127.0.0.1
  == Manager 'sendcron' logged on from 127.0.0.1
  == Manager 'sendcron' logged off from 127.0.0.1
  == Manager 'sendcron' logged off from 127.0.0.1
  == Manager 'sendcron' logged on from 127.0.0.1
  == Spawn extension (default, 8600051, 1) exited non-zero on 'SIP/ipfon-00000005'
    -- Executing [h@default:1] AGI("SIP/ipfon-00000005", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0---------------") in new stack
    -- <SIP/ipfon-00000005>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0--------------- completed, returning 0


calls made one by one from plain vicibox configuration/database

same config, same campaign with one customer phone number (115 leads for test purposes), same campaign caller id (from SIP provider)

between connections only change was turning carriers on-off to use only one of them, then sip reload, dialplan reload,

GSM carrier added as SIP as there is no other option to set this. but only dialplan in it is configured, no other options (they are in dongle.conf file)



DIALPLANS:

SIP:

Code: Select all
exten => _915.,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _915.,n,SIPAddHeader(X-Fid: ${SIPCALLID})
exten => _915.,n,Dial(SIP/${EXTEN:5}@ipfon,30,tTo)
exten => _915.,n,Hangup


GSM (Dongle):

Code: Select all
exten => _915.,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _915.,n,Dial(Dongle/g1/${EXTEN:5},20,Ttor)
exten => _915.,n,Hangup


visible differences are:
1. SIP connection is visible on agents screen "LIVE CALLS IN YOUR SESSION" as second position named SIP/ipfon
2. GSM there is no such position
3. both connections are sound connected
4. SIP connection is in full agent control for whole time
5. GSM connection is in full agent control for about 15 seconds, after this time only customer can end call, agents button does not disconnect.
6. after 33 seconds (everytime) GSM connection on agents screen is marked as "customer has hung up" - even though connection is still live and agent can talk to customer. clicking go back and hung up does nothing.

thank you William and others for interest in this problem, I hope for response.

now it's finally time to sleep :)
now:
[vicidial]: ViciBox 6.0 Ast 1.8.29.0-vici | vd-2.10-448a-140706-0927 ------ SIP connected to GSM Gateway
[GSM Gateway]: Asterisk 1.8.29.0 | chan_dongle-1.1.r14 | 7x Huawei Dongles (E156G, E169, E1550 voice enabled)
nysander
 
Posts: 52
Joined: Wed Jul 23, 2014 5:06 am

Re: Local channel not created after answering call

Postby williamconley » Sun Aug 03, 2014 11:07 pm

1) good dongle cli
2) bad dongle cli
so i can compare those two AND to demonstrate that two way sound actually works on the dongle (without two-way sound, vicidial will NOT send the call to an agent)

and include the call from start all the way to hangup.

does your asterisk version match the admin->servers version listed for the server?

As a test, you should try to put your dongle devices on another asterisk server that is pure asterisk and works with the dongle properly. then connect to that server via sip (essentially turning that 2nd server into a "dongle appliance" unrelated to Vicidial).

Nice thing about that is that other vicidial servers could also use those connections and you have removed the "hardware" requirement from your vicidial server. This could aid in upgrade stability as well.
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20018
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: Local channel not created after answering call

Postby nysander » Mon Aug 04, 2014 1:36 am

bad dongle cli is above

good dongle cli is below

here is same campaign set to MANUAL dial mode

Code: Select all
[Aug  4 08:22:05]     -- Executing [8600051@default:1] MeetMe("Local/8600051@default-00000002;2", "8600051,F") in new stack
[Aug  4 08:22:05]        > Channel Local/8600051@default-00000002;1 was answered.
[Aug  4 08:22:05]     -- Executing [91548505000000@default:1] AGI("Local/8600051@default-00000002;1", "agi://127.0.0.1:4577/call_log") in new stack
[Aug  4 08:22:05]     -- AGI Script Executing Application: (EXEC) Options: (Set(_CAMPCUST=TEST))
[Aug  4 08:22:05]     -- <Local/8600051@default-00000002;1>AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
[Aug  4 08:22:05]     -- Executing [91548505000000@default:2] Dial("Local/8600051@default-00000002;1", "Dongle/g1/505000000,20,Ttor") in new stack
[Aug  4 08:22:05]     -- Called Dongle/g1/505000000
[Aug  4 08:22:05]     -- Dongle/dongle0-0100000000 is making progress passing it to Local/8600051@default-00000002;1
[Aug  4 08:22:06]   == Manager 'sendcron' logged off from 127.0.0.1
[Aug  4 08:22:06]   == Manager 'sendcron' logged on from 127.0.0.1
[Aug  4 08:22:06]   == Manager 'sendcron' logged off from 127.0.0.1
[Aug  4 08:22:11]   == Manager 'sendcron' logged off from 127.0.0.1
[Aug  4 08:22:12]     -- Dongle/dongle0-0100000000 answered Local/8600051@default-00000002;1
[Aug  4 08:22:28]   == Manager 'sendcron' logged on from 127.0.0.1
[Aug  4 08:22:28]     -- Executing [h@default:1] AGI("Local/8600051@default-00000002;1", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----ANSWER-----24-----16") in new stack
[Aug  4 08:22:28]     -- <Local/8600051@default-00000002;1>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----ANSWER-----24-----16 completed, returning 0
[Aug  4 08:22:28]   == Manager 'sendcron' logged on from 127.0.0.1
[Aug  4 08:22:28]   == Spawn extension (default, 8600051, 1) exited non-zero on 'Local/8600051@default-00000002;2'
[Aug  4 08:22:28]     -- Executing [h@default:1] AGI("Local/8600051@default-00000002;2", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0---------------") in new stack
[Aug  4 08:22:28]     -- <Local/8600051@default-00000002;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0--------------- completed, returning 0
[Aug  4 08:22:29]   == Spawn extension (default, 91548505000000, 2) exited non-zero on 'Local/8600051@default-00000002;1'


to the post above difference is that in "LIVE CALLS IN YOUR SESSION" I have "Local/...." channel created and 2way sound works as previously.

So I confirm that 2 way sound works in both MANUAL and AUTODIAL but in latter channel is not visible on agent's screen

in vicidial I have version 1.4.21.2 installed is 1.8.29.0-vici, after change to correct version situation did not changed

that is good Idea to make dongle server unrelated to vicidial, but I have no hardware atm so I will try to test this making dongle server on vmware player appliance.

will be good plain vicibox OS before vicibox-express installation?

how can I sip-trunk/iax-trunk this both servers with each other? as I have not done such thing before.
now:
[vicidial]: ViciBox 6.0 Ast 1.8.29.0-vici | vd-2.10-448a-140706-0927 ------ SIP connected to GSM Gateway
[GSM Gateway]: Asterisk 1.8.29.0 | chan_dongle-1.1.r14 | 7x Huawei Dongles (E156G, E169, E1550 voice enabled)
nysander
 
Posts: 52
Joined: Wed Jul 23, 2014 5:06 am

Re: Local channel not created after answering call

Postby nysander » Mon Aug 04, 2014 6:21 am

William,

I have installed on vmware plain vicibox (without vicidial-express) and configured it as carrier for dongles - name it gsm-gateway. Attached the two from my signature. On vicidial side I have added new SIP carrier and pointed to gsm-gateway.
And it WORKED !!!!!!!!!! without any problem, almost out of the box ...

I did not setup inbound connections yet but my priority was outbound calling.


so if we did not debug above problems with dongles on same server as vicidial I will buy another server and install this setup on them.

I plan to connect up to 20 dongles to this gateway, will 1x QC e5320 1,86 - 4 GB RAM - 2x 73GB SAS (mirror) will be sufficient for it?
now:
[vicidial]: ViciBox 6.0 Ast 1.8.29.0-vici | vd-2.10-448a-140706-0927 ------ SIP connected to GSM Gateway
[GSM Gateway]: Asterisk 1.8.29.0 | chan_dongle-1.1.r14 | 7x Huawei Dongles (E156G, E169, E1550 voice enabled)
nysander
 
Posts: 52
Joined: Wed Jul 23, 2014 5:06 am

Re: Local channel not created after answering call

Postby williamconley » Mon Aug 04, 2014 9:29 am

You should consider leaving it on the VM. 20 dongles (20 calls) is not too much traffic for a virtual machine when it's not running meetme rooms with hi-res perl timing.

also:
in vicidial I have version 1.4.21.2 installed is 1.8.29.0-vici, after change to correct version situation did not changed
Did you reboot after this to be sure your new settings took effect?
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20018
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: Local channel not created after answering call

Postby nysander » Mon Aug 04, 2014 9:52 am

well I did not reboot after change. I will try this. but as I remember from previous tests this value was valid and dongles were not working.

Do you mean setting vicidial on host and gsm-gateway on guest on the same host? atm gateway is set on my own laptop.

I plan such hardware setup:

HP DL380 G5 1x QC e54xx 2,5GHz 8GB RAM 2x146 GB (mirror) 1x PS - for vicidial All In 1
HP DL360 G5 1x QC e53xx 1,86GHz 4GB RAM 2x73 GB (mirror) 1x PS - for gsm-gateway

Is is sense to add second CPU to 1st machine when its price (CPU) is 3/4 of whole 2nd machine - current pricing?

from my experience it is easier to manage USB devices on host than on VM guest but if DL380 G5 will do job for both (even with 2 CPU's) maybe I will go that way.
now:
[vicidial]: ViciBox 6.0 Ast 1.8.29.0-vici | vd-2.10-448a-140706-0927 ------ SIP connected to GSM Gateway
[GSM Gateway]: Asterisk 1.8.29.0 | chan_dongle-1.1.r14 | 7x Huawei Dongles (E156G, E169, E1550 voice enabled)
nysander
 
Posts: 52
Joined: Wed Jul 23, 2014 5:06 am

Re: Local channel not created after answering call

Postby williamconley » Mon Aug 04, 2014 10:48 am

The goal of virtual: ease of use with less hardware. How you get there is kind of personal. Don't go by my opinion. LOL

And do test after that reboot. The problem in question is odd enough to be related.

I'd still advise having a completely separate machine for the "dongle appliance" for the long-term if possible. It really does mean that if your Vicidial HD dies one day ... you do NOT need to figure out the Dongle situation again. Just re-install the latest Vicidial, restore (and upgrade) your Vicidial DB ... and you're back in business (with a later version of Vicidial!). And yes that also means upgrading can be done any time you get bored. The dongle appliance will be unaffected. This is why many prefer grandstream gateways to PSTN cards directly in the server. makes the Vicidial server "generic hardware" and "generic Vicidial installation". OS and hardware independent is handy as time goes by.
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20018
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)


Return to Support

Who is online

Users browsing this forum: No registered users and 111 guests