IAX2 or SIP? Anyone have any problems with adamstelecom?

Any and all non-support discussions

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

IAX2 or SIP? Anyone have any problems with adamstelecom?

Postby computergroove » Mon Mar 24, 2008 7:34 am

I am setting up a 4 agent call center (I want to move it up to 12 agents later) . I am going to be calling for charities and there wont be any incoming calls. I will be calling residential locations. I am going to use a DSL or Cable connection. I have new Dell machines C2D on all 4 agent stations and a server that I built. The Dell's have usb Headsets Plantronics .audio 350. My question is what kind of VOIP service should I use? IAX2 or SIP? I was looking at going with IAX2 here http://www.adamstelecom.net/buyonline.html
computergroove
 
Posts: 59
Joined: Sat Dec 29, 2007 5:24 pm

Postby ramindia » Mon Mar 24, 2008 6:24 pm

Hi

both are Good

depend on your requirement you need to use

using SIP would give you advantage compare to IAX, since many providers support

ram
Kindly post your feedback, if this solution works.
so its very usefull for others who join later as a NEWBIE.
ramindia
 
Posts: 688
Joined: Wed Oct 11, 2006 4:06 am
Location: India

Postby computergroove » Mon Mar 24, 2008 6:41 pm

I tried to fill everyone in on all of my known requirements. Is there something else that is needed to know in order to make a decision? I aso included the provider link adamstelecom.com which sell iax2 lines for $10 per phone line for unlimited outgoing calls. My question is more to better understand the differences and advantages of the 2 protocol options.
computergroove
 
Posts: 59
Joined: Sat Dec 29, 2007 5:24 pm

Postby ramindia » Mon Mar 24, 2008 9:22 pm

Hi


for PD requirement, you need to have multi channel account

rather phone accounts.

ram
Kindly post your feedback, if this solution works.
so its very usefull for others who join later as a NEWBIE.
ramindia
 
Posts: 688
Joined: Wed Oct 11, 2006 4:06 am
Location: India

Postby aster1 » Tue Mar 25, 2008 8:38 am

Don't go for $10 unlimited type of packages if you planning for serious voip traffic , such packages are mostly for home users and even if not providers have limit like 1 call at a time or maybe 2 . Go for flat rate per minute wholesale providers which don't have channel limits .
I am available for part time support and remote installations :)
aster1
 
Posts: 281
Joined: Sun Dec 24, 2006 6:48 am
Location: India

Postby computergroove » Wed Mar 26, 2008 7:29 am

I was actually planning on purchasing 1 - $10 per line being used by vicidial. Is there still a problem with this?
computergroove
 
Posts: 59
Joined: Sat Dec 29, 2007 5:24 pm

Postby ramindia » Wed Mar 26, 2008 6:38 pm

for testing with one agent fine

but for a commercial call center requirement,
its not the best.

ram
Kindly post your feedback, if this solution works.
so its very usefull for others who join later as a NEWBIE.
ramindia
 
Posts: 688
Joined: Wed Oct 11, 2006 4:06 am
Location: India

Adam's Telecom

Postby voiptech » Thu Mar 27, 2008 9:01 pm

I have been using adams telecom for about six months so far and I have had no problems.

When signing up customer service was very friendly and helpful and the woman even suggested certain asterisk or trixbox configurations.

I use the 10$ plan with vividial and I will continue to. Also each plan allows for more than one simoultanious call. Its two channels per line. Its a perfect deal! :) :lol:

PS. I think they have a business plan if you ask for it. It is meant for more simoultanious channels/calls
voiptech
 
Posts: 1
Joined: Thu Mar 27, 2008 8:52 pm


Return to General Discussion

Who is online

Users browsing this forum: No registered users and 223 guests