Get Customer a ring for inbound calls

Any and all non-support discussions

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

Get Customer a ring for inbound calls

Postby palani.sivagurunathan » Mon Sep 30, 2013 6:07 am

Hi,

Can we modify this one, instead of just a beep sound replace it with a ring when inbound calls comes in.


Thanks,
PAlani
palani.sivagurunathan
 
Posts: 97
Joined: Tue Apr 13, 2010 9:13 am

Re: Get Customer a ring for inbound calls

Postby williamconley » Tue Oct 01, 2013 6:15 pm

1) Welcome to the Party! 8-)

2) As you are obviously new here, I have some suggestions to help us all help you:

When you post, please post your entire configuration including (but not limited to) your installation method and vicidial version with build.

This IS a requirement for posting along with reading the stickies (at the top of each forum) and the manager's manual (available on EFLO.net, both free and paid versions)

You should also post: Asterisk version, telephony hardware (model number is helpful here), cluster information if you have one, and whether any other software is installed in the box. If your installation method is "from scratch" you must post your operating system and should also post the .iso version from which you installed your original operating system. If your installation is "Hosted" list the site name of the host.

If this is a "Cloud" or "Virtual" server, please note the technology involved along with the version of that techology (ie: VMware Server Version 2.0.2). If it is not, merely stating the Motherboard model # and CPU would be helpful.

Similar to This:

Vicibox X.X from .iso | Vicidial X.X.X-XXX Build XXXXXX-XXXX | Asterisk X.X.X | Single Server | No Digium/Sangoma Hardware | No Extra Software After Installation | Intel DG35EC | Core2Quad Q6600

3) Do you refer to the sound heard by the agent or the customer? If you want the agent's phone to ring, that would be an "On-Hook Phone". If you want the client to hear ringing while waiting for the agent instead of MOH, use a ring-tone MOH sound. If you want to replace the "bing" on an inbound call with a "ring", there is a setting for this in the ingroup settings if your version of Vicidial is recent enough (you didn't post your version so I can't tell you, have a look in the ingroup settings!).

4) Happy Hunting! 8-)
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20018
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: Get Customer a ring for inbound calls

Postby palani.sivagurunathan » Wed Oct 02, 2013 8:04 am

Team,

This is my Installation details

Ubuntu-12.04
Linux build-essential
asterisk-1.4.39.1
asterisk-addons-1.4.12
libpri-1.4.12
dahdi-linux-complete-2.6.0+2.6.0
asterisk-perl-0.08
PHP 5.3.10
Apache/2.2.22
MySql 5.5.29

Vicidial : VERSION: 2.8-403a

Please Advice.


Thanks,
PAlani
palani.sivagurunathan
 
Posts: 97
Joined: Tue Apr 13, 2010 9:13 am

Re: Get Customer a ring for inbound calls

Postby williamconley » Wed Oct 02, 2013 8:40 am

williamconley wrote:3) Do you refer to the sound heard by the agent or the customer? If you want the agent's phone to ring, that would be an "On-Hook Phone". If you want the client to hear ringing while waiting for the agent instead of MOH, use a ring-tone MOH sound. If you want to replace the "bing" on an inbound call with a "ring", there is a setting for this in the ingroup settings if your version of Vicidial is recent enough (you didn't post your version so I can't tell you, have a look in the ingroup settings!).

4) Happy Hunting! 8-)
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20018
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: Get Customer a ring for inbound calls

Postby palani.sivagurunathan » Thu Jan 09, 2014 1:16 pm

Team,
This is my vicidial version , how can i set the ring tone .

VERSION: 2.8-403a

Thanks,
PAlani
palani.sivagurunathan
 
Posts: 97
Joined: Tue Apr 13, 2010 9:13 am

Re: Get Customer a ring for inbound calls

Postby williamconley » Thu Jan 09, 2014 4:31 pm

Ring tone heard by whom? Agents making an outbound manual dial call? Clients calling in to the system?
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20018
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: Get Customer a ring for inbound calls

Postby palani.sivagurunathan » Fri Jan 10, 2014 12:50 am

Team,

Client calling to system , So client need to get ringtone.


Thanks,
PAlani
palani.sivagurunathan
 
Posts: 97
Joined: Tue Apr 13, 2010 9:13 am

Re: Get Customer a ring for inbound calls

Postby williamconley » Fri Jan 10, 2014 12:55 am

When a client calls Vicidial, the call is immediately answered and the call is sent to the configured location within Vicidial. There is no ring, thus no "ring-tone".

If you configured the call to go to an Ingroup, there can be a "welcome" message and/or Music on Hold. If the call is configured to go to a Call Menu, there is of course the Menu Audio.

So the question is, when a call arrives on a DID in your system, where do you have it configured to go?
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20018
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: Get Customer a ring for inbound calls

Postby palani.sivagurunathan » Fri Jan 10, 2014 1:38 am

Team,

When calls come in my system , Call directly routed to free agent.

Thanks,
PAlani
palani.sivagurunathan
 
Posts: 97
Joined: Tue Apr 13, 2010 9:13 am

Re: Get Customer a ring for inbound calls

Postby palani.sivagurunathan » Fri Jan 10, 2014 10:19 am

Team,

I have setup ringtone in "Welcome Message Filename" ingroup setup . Ringtone is played , But before reaching to the agent I am getting some delay(No sound) . How can i reduce the delay time .


Thanks,
PAlani
palani.sivagurunathan
 
Posts: 97
Joined: Tue Apr 13, 2010 9:13 am

Re: Get Customer a ring for inbound calls

Postby williamconley » Fri Jan 10, 2014 10:12 pm

Change the length of the welcome message ring. Also check your OnHold configuration, as this can block the call from getting to an agent for several seconds (just below the welcome message filename is the OnHold feature set).
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20018
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: Get Customer a ring for inbound calls

Postby palani.sivagurunathan » Tue May 05, 2015 4:13 am

Hi ,

Can we setup the Ringtone for inbound call like mobile phone . No need to configure in welcome" message and/or Music on Hold. there is any other option configure ringtone.

Please Advice

Thanks,
PAlani
palani.sivagurunathan
 
Posts: 97
Joined: Tue Apr 13, 2010 9:13 am

Re: Get Customer a ring for inbound calls

Postby greenmon » Tue May 05, 2015 3:57 pm

Hi,

In in-group settings, make these changes..

Welcome message filename- ring (any audio with a ringing sound) (Put this audio around 9 seconds longer)
Play Welcome Message: Always
Music On Hold Context: (select your MOH)
On Hold Prompt Filename: (any audio below 9 seconds) (You can also leave this blank)

Agent Alert Filename: (use any small audio ~5 seconds for agent alert purpose)
Agent Alert Delay: 6 Seconds

Also set allow alerts=1 for every agent.

__________________________________________

When a calls comes in, the caller will listen ringing sound, after ringing sound plays for 9 seconds the server will look for an available agent. MOH will play until an agent it free. As soon as you have a free agent, the agent will listen the agent alert audio (instead of Ding) and he will also get a popup of incoming call. Agent will have the time of 6 seconds to answer that call.
greenmon
 
Posts: 9
Joined: Tue May 05, 2015 3:36 pm

Re: Get Customer a ring for inbound calls

Postby amit1bhatt » Sat Dec 21, 2019 5:48 pm

Hello All,

is this working for any one ?

i try but not success , please share you feedback .
amit1bhatt
 
Posts: 5
Joined: Tue Jul 30, 2019 9:29 am

Re: Get Customer a ring for inbound calls

Postby williamconley » Thu Dec 26, 2019 1:20 pm

Perhaps you should try listing your settings and/or changes and any error responses you are getting. From "no success", we really can't determine the problem.
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20018
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: Get Customer a ring for inbound calls

Postby BAHIRA » Fri Dec 27, 2019 1:27 am

yes, it's worked, maybe you didn't follow the proper instruction. try to do it again, I am sure it will be solved.
BAHIRA
 
Posts: 2
Joined: Thu Dec 12, 2019 6:21 am


Return to General Discussion

Who is online

Users browsing this forum: No registered users and 40 guests